I have some car audio stuff for sale. It is all been sitting in my cousins car for 6 months and only used for about 2 months, if that. He has asked me to sell it for him since he has left for Europe. It all works perfect, just some sligh cosmetic blemishes. Any questions or offers can be PM'd or E-Mailed to chris@daugherty.org I know that some of you may be sceptical because I am fairly new, but I have a good reputation on ebay under the TEAMZZYZX name. Anyways, heres what I have:

2 Sets (4 6.5", 4 tweeters, and 2 crossovers) of MB Quart Q-Series 6.5" components with tweeters and crossovers.
$270 each set (set=everything in picture)



1 Soundstream Rubicon 604 Amp....Its a 4 chan. 600 watt amp.
$200SOLD



1 Soundstream Rubicon 1002 Amp....Its a 2 chan. 1000 watt amp.
$225SOLD



1 Sony XDP-210EQ....Its Main features:
---> 21-Band graphic Equalizer
---> 9 EQ User Memories
---> Time Alignment
---> Digital Bass/Treble Adjustment
---> 2-way Digital Crossover
---> 2 Digital/2 Analogue Inputs
---> 4 Volt output
---> For headunits with DSP (Digital Signal Process) control
$200

 

Little more info on the MB QUARTS:

They are very comparable to the QSD 216 that is on the market today. The actual series for these is QM 218.61 Q. Here is a little chart that I made that shows the differences between the two.

QSD 216

Impedance 4 Ohms
Frequency Response 35-32k
Sensitivity 85.5 (2,6)dB
Power Range 90-170 Watts
Crossover Frequency 2.400Hz

QM 218.61

Impedance 4 Ohms
Frequency Response 48Hz to 32,000Hz
Sensitivity 86dB (1 watt, 1 meter)
Power Range 90watts (rms.) to 170watts
Crossover Frequency 18 dB/Octave @ 2600Hz

 

BUMP!!!

 

C'mon guys Anyone???

 

BUMP!!!!

 

^^^another bump^^^

 

Refresh my memory, I feel stupid today,

4 channel amp, a channel is? for ex. Front pair? or just say Front Left?

Can I hook up front pair to 1 channel, rear pair to 1 channel, and Sub to 1 channel? And have a free channel? Is that how that works?

I know its basic, but again, long stupid day

 

They are the Rubicon. Not Rubicon II. The link used to go to the specs for these amps but they changed their site. Here is the info though.

SOUNDSTREAM RUBICON 1002
NO. OF CHANNELS: - 2
OUTPUT (watts):RMS @ 4 Ohms - 200 X 2
RMS @ 2 Ohms: - 500 X 5
RMS Bridged @ 4 Ohms: - 1000x1
T.H.D.: - >0.05%
SIGNAL TO NOISE RATIO: - 10 - 30k
DAMPING FACTOR: - >100dB
FREQUENCY RESPONSE: - >200
INPUT SENSITVITY (VOLTS): - 0.3 - 5.0
CROSOVER SLOPES High-Pass: - 12dB
CROSOVER SLOPES Low-Pass: - 24db
CROSSOVER FREQUENCY High-Pass(Hz): - 70 - 160
CROSSOVER FREQUENCY Low-Pass(Hz): - 55 - 220
DIMENSIONS (INCHES): - 2.25x16x12

RUBICON 604
Rated Power (4 ohms 12.6v) - 80W x 4
Rated Power (2 ohms 12.6v) - 160W x 4
Maximum Rated RMS Power - 600W
[B]Minimum Rated Impedance[/] - 1 Ohm
Proprietary RUBI Power Supply - YES
Stabilized Apex Current Topology - YES
Harmonic Bass Alignment - YES
Darlington Power Array - YES
Chassisink - YES
Trident Protection Topology - YES
High Current Capability - AUTO
On Board Crossover, Slope & Type (Variable-V; SIP-S) - V-12dB/oct HP, 24dB/oct LP
Full Range RCA outputs - YES
Differentially Balanced Input - YES
Fully-Balanced Studio Inputs - YES
Hawkins Bass Control (Fixed-F, Variable-V, Parametric-P) - YES-V
AirBASS 2000 - YES
Bridgeable for Mono or Mixed Mono - YES
Enhanced Dual Class A Drive Boards - YES
Power & Ground Connectors (gauge) - 4
Input Level Pots - 4
Drive Delay Muting - YES
Mil-spec Glass Epoxy Circuit Boards - YES
Dimensions (WxDxH inches) - 17.25 x 11.375 x 2.25
Dimensions (WxDxH mm) - 437 x 288 x 57

 

BUMP!!!

 

Bump for Price Adjustment

 

BUMP, STILL GOT THE SONY EQ AND MB QUARTS FOR SALE.