Western Arms Prokiller Mark][ (2nd from right)
This is a nice metal frame/plastic slide 1911 style pistol. It is a pretty hefty pistol. It has a semi-auto and full automatic fire modes. The magazine holds 32 bb's. The gun did have orange paint at one time but it was only on the threaded inner barrel and not the slide. The slide/frame have never been painted. I have used this in maybe one game and have shot around 500 bb's through it. It is my second cleanest gun as far as condition goes.
I haven't really kept up with current prices but Western Arms airsoft handguns are regarded as the best there is. I am looking for $200 for this one.

Tokyo Marui Desert Eagle (very right)
This is a decently heavy Desert Eagle made by Tokyo Marui. It is semi-auto only. The magazine holds 15 bb's. The gun did have orange paint at one time all around the muzzle. I have gotten it all off but you can tell where the paint ate into the plastic and discolored it a little. I have also changed it from its original plastic slide to a metal slide. The extra weight doesn't make it very practical for actually playing games with. This is probably my dirtiest gun condition wise. I never played with it after the metal slide though, so that part is in very good condition.
I am asking $120 for this one.

Digicon Thompson Contendor (in the middle with the wooden grips)
This is a Thompson Contendor made by Digicon. Like the real version this is modeled after, the barrel breaks off from the grip and accepts a single metal bullet which is hollowed out to hold a single bb. This is probably the strongest airsoft that I own. Using h22 gas it can shoot at over 350 fps. There are many upgrades for this gun that can get it to a moderate 450fps and beyond.
I am asking $250 for this one.

Western Arms Berettas (very left)
These are Beretta 92fs's made by Western Arms. They hold approximately 24bbs in the magazine. One of them is in pristine condition. It has never been used. The reason why though is because it is missing one small spring that makes the plunger for the gas valve retract when there is no magazine in the mag well. The other Beretta was my main carry gun when playing. It is in good condition considering, but I did drop it once causing the beavertail on the grip to break off. it has been superglued back but it is pretty obvious. Does not interfere with the mechanism though.
Both $200

M79 Grenade Launcher
Takes the same cartridges as the Sun Project m203
$250

M16 with M203
Tokyo Marui M16 A2 with a Sun Project M203 underslung.
Comes with four extra magazines and a Large battery.
$350

Grenades
Two angs and one caw.
$100 for 3
or $40 each

NOT PICTURED

Maruzen APS2-SV
Spring bolt action rifle. Never really played with it. It came with orange paint but because it was metal that was painted you cannot really tell. Comes with cheap 3-9X scope.
$250

Maruzen M1100
Pistol grip magazine type shotgun. Shoots 3 bb's at a time and has a cycling slide. Does not eject any shells. In perfect condition; never played any games with it and did not have any orange paint.
$200

Let me know if the prices are too high.

 

Whoaa another airsofter...wat a coincidence....here's one pic of my arsenal. If anyone needs anything...feel free to ask..well since the post is up already...i'll just post along

 

how does a bb grenade launcher work? I would like to get into this... but no one I know does it. Man those twin barettas look SWEET! They look intimidating just sitting in that case! (and I don't mean as bb guns).

 

The grenade has a gas reservoir and six inner barrels. When you pull the trigger on the launcher, it pushes in a plunger that release the gas in the grenade. The gas pushes the bb's out of the inner barrels and sprays them out .



I took some pictures of the m16 right now. I'll send them to you tomrorow from work.



Nice airsoft collection. I notice you have some real steel too. Is that a M1 I see? All I have is a 92inox(italian) and a m1garand. (30-06)

 

I've owned the m16 for about two years now and the m203 for a year. I've played around 5 or 6 games with them. It still shoots strong; the only problems I've had was that the triangular piece for the foregrip/handguard would not fit.I also dropped the tube once, causing the handgrip on the m203 tube to crack. I did a good job at gluing the handgrip on, but as you can see I got some superglue on the tube. You can probably sand it off with a light grit sandpaper; I never bothered to try doing so.

 

how's it going? The M1 that you are reffering to in my pic... there's no M1... I thought you were talking about the Garand m1. The colt you see is the m4a1 RIS. The shotty is a 5+1 defender. And the glock 23 .40s...thats bout it.. lol... O maybe its the G36c you see from Hecklor and Koch...thats airsoft with the dummie rounds in the clip.. =)... where are you located by the way?

 

Ahh, I thought maybe the shotgun was a real Benelli M1. It looked kinda like my boss's. The G36c is very . If I was still really into airsoft I think I would've picked one of those up.

I live in LA, close to LAX airport. I used to play with Replisoft back when they were a team. Played a few games here and there but I don't like how the socal airsoft scene has turned. Where abouts are you from?

 

I was just in LAX today and saw all these news vans...it was for the bounty hunters returning from mexico. I forgot about the m1 benelli lol...it looks like it huh? Yea i got ghost ring sites on it... the benelli ghost rings site option is an extra $200 ...lol ... Im in Orange County area near Disneyland. I understand bout the games...email me if you can at boostinwrx@hotmail.com if you can.

Thanks,
Clear

 

Sorry, here is the update










You can see the discoloration on the front of the desert eagle.