It's finally Monday - Yeah
Originally Posted by Egan
Yes, Brandon did my corner weighting and alignment.
What are the numbers???? And how did it all feel? And how much lower are you?
Thread Starter
Registered User
iTrader: (14)
Joined: Nov 2001
Posts: 14,221
From: Peoples Republik of Kalifornia
Car Info: 05 H2 SUT, 45 GPW, 10 Murano, 13 Boss 302
Originally Posted by lowball
Glad you made it back!
What are the numbers???? And how did it all feel? And how much lower are you?
What are the numbers???? And how did it all feel? And how much lower are you?
I ended up with:
Front Camber -2.7 (this was the plates and bolts maxxed out)
Front Toe -.01 (basically 0)
Rear Camber -1.5 (which is where I had it set. this is maxxed out without adjusting the lateral links, which I didn't want to do at this time)
Rear Toe 0.00
My cross weight was 49.89% left and 50.11% right, so he didn't have to do much of anything. Front to back distribution was 57.26% front, 42.74% rear which is pretty close to the 60/40 split we all assume. My frame heights were 25.3/4" at each corner.
Originally Posted by Egan
We left the height where I had it. If I had gone a little lower, I could have gotten more negative camber, but I was concerned about tire clearances. I may lower it a bit more later, but Brandon said as long as I lower each corner the same amount, the corner weighting should be unchanged.
I ended up with:
Front Camber -2.7 (this was the plates and bolts maxxed out)
Front Toe -.01 (basically 0)
Rear Camber -1.5 (which is where I had it set. this is maxxed out without adjusting the lateral links, which I didn't want to do at this time)
Rear Toe 0.00
My cross weight was 49.89% left and 50.11% right, so he didn't have to do much of anything. Front to back distribution was 57.26% front, 42.74% rear which is pretty close to the 60/40 split we all assume. My frame heights were 25.3/4" at each corner.
I ended up with:
Front Camber -2.7 (this was the plates and bolts maxxed out)
Front Toe -.01 (basically 0)
Rear Camber -1.5 (which is where I had it set. this is maxxed out without adjusting the lateral links, which I didn't want to do at this time)
Rear Toe 0.00
My cross weight was 49.89% left and 50.11% right, so he didn't have to do much of anything. Front to back distribution was 57.26% front, 42.74% rear which is pretty close to the 60/40 split we all assume. My frame heights were 25.3/4" at each corner.
VIP Member
iTrader: (7)
Joined: Jun 2003
Posts: 25,095
From: Funtown
Car Info: A limousine with a chauffer
Originally Posted by soggynoodles
Wendy's rocks!
I got a burger and a salad. :banana:
I got a burger and a salad. :banana:
Dirty Redhead
iTrader: (10)
Joined: Sep 2004
Posts: 7,204
From: Commuting? I don't know what that means anymore.
Car Info: 05 WRX Wagon (Crystal Gray)
Originally Posted by Scott@S-S
Wendy's sounds good today