anyone know how to fix an in-sink-erator?
Thread Starter
Registered User
iTrader: (5)
Joined: Feb 2005
Posts: 1,410
From: sacto
Car Info: '99 2.5rs - Rally Blue
anyone know how to fix an in-sink-erator?
guess someone dropped a shot glass down the drain last night. as i was cleaning up this morning, the drain clogged...so i turn on the disposal thing. you can imagine what happened next. so i cleaned out the glass and **** and now when i try and turn it on it just makes a groaning noise 
________
ELECTRO GYROCATOR
________
ELECTRO GYROCATOR
Last edited by svek; Feb 20, 2011 at 02:41 PM.
Registered User
Joined: Dec 2005
Posts: 3,501
From: citrus heights
Car Info: 2001 Miata NB
our disposal went out and we bought a new one. its was mostly all plug and play repair. i think we payed 90 bucks for a new one, but there were some for 60 at lowes and home depot
Registered User
iTrader: (5)
Joined: Dec 2005
Posts: 1,113
From: sacramento, ca
Car Info: 1995 Legacy L wgn & 1995 Legacy Brighton wgn
yeah from my experience, if your disposal just sits there and makes that wierd noise, just replace the damn thing. they're cheap enough to where it's really not worth your time to mess with it a whole lot.
VIP Member
iTrader: (7)
Joined: Jun 2003
Posts: 25,095
From: Funtown
Car Info: A limousine with a chauffer
Registered User
Joined: Mar 2006
Posts: 59
From: Elk Grove CA
Car Info: 1990 subaru Legacy L Wagon
On the bottem of most disposals is a place to put in a allen wrench or hex key some have one taped to the side/ you turm it manualy a few times and then try flushing water again. I have had to un jam a few of these in my days..
I think you need to turn is clock wise and if it still won't move try the other way then cloack wise. the glass can't damage those types blades but metal can dental them up. As long as they was not smoke or any flams you should be ok.
If it just won't clean see if some can open it to clear it before going out and buying a new one as some can be open up to clean out .. just don't do it your self as theos blades are nice and sharp and can cut up bone as well as flesh.
good luck
CC
I think you need to turn is clock wise and if it still won't move try the other way then cloack wise. the glass can't damage those types blades but metal can dental them up. As long as they was not smoke or any flams you should be ok.
If it just won't clean see if some can open it to clear it before going out and buying a new one as some can be open up to clean out .. just don't do it your self as theos blades are nice and sharp and can cut up bone as well as flesh.
good luck
CC
Thread Starter
Registered User
iTrader: (5)
Joined: Feb 2005
Posts: 1,410
From: sacto
Car Info: '99 2.5rs - Rally Blue
well, the bottom of the shot glass was like 1/4 thick glass so i think that ****ed it up. thats all thats left of the glass. i still cant get the damn thing to spin up 
________
FORD ESCORT (EUROPE) HISTORY
________
FORD ESCORT (EUROPE) HISTORY
Last edited by svek; Feb 20, 2011 at 02:41 PM.
Registered User
iTrader: (4)
Joined: Nov 2004
Posts: 2,339
From: Bong Hits 4 Jesus
Car Info: Dying is not an option. It's an upgrade.
Originally Posted by sonicsuby
Not to hijack this thread but is there anyway to remove that air gap on the sink? Everytime I run my dishwasher water shoots out from that valve which is on the sink.. is that normal?
Registered User
iTrader: (1)
Joined: Jul 2006
Posts: 2,106
From: Mount Vernon, Washington
Car Info: 2002 WRX
Originally Posted by turbo_4_life
Not to hijack this thread but is there anyway to remove that air gap on the sink? Everytime I run my dishwasher water shoots out from that valve which is on the sink.. is that normal?
Originally Posted by CCorsair
On the bottem of most disposals is a place to put in a allen wrench or hex key some have one taped to the side/ you turm it manualy a few times and then try flushing water again. I have had to un jam a few of these in my days..
Also for the airgap thing, running the disposal for a little bit seems to clear it up for me...
