tuning shops in Colorado
01-28-2004, 09:34 PM
#1
Registered User
Thread Starter
Join Date: Jan 2003
Location: Colorado
Posts: 144
Car Info: 2000 2.5 RS USDM STI block, SOHC heads GT25 Ball bearing turbo, TMIC, TXS BOV, Tial wastgate, etc...
tuning shops in Colorado
does anyone know of any GOOD shops in colorado for subys? I have been looking and I have heard of some good places like Maike Shaw subaru, or Mac.. but no one has told me if any of these places tune subarus. IHave an RS-STI and am am desperate to get my car tuned finally.. PLease let me know!!!!! Thanks
02-09-2004, 11:44 AM
#4
Registered User
Thread Starter
Join Date: Jan 2003
Location: Colorado
Posts: 144
Car Info: 2000 2.5 RS USDM STI block, SOHC heads GT25 Ball bearing turbo, TMIC, TXS BOV, Tial wastgate, etc...
Yes engine.. I need to get my A/.F and timing done. I have a fuel/timing computer, but because of lack of a dyno.. I don;t really have any way to tune it.
02-10-2004, 09:11 AM
#5
Registered User
iTrader: (1)
Join Date: Dec 2003
Location: Westminster, Colorado
Posts: 293
Car Info: 2004 Impreza WRX
AWD Dyno .. You got me, this is my first AWD car and Ive only had it for a month now "its not even broken in" .. Let me know if you find a shop in town with one of those suckers.
02-17-2004, 04:58 PM
#6
Registered User
iTrader: (1)
Join Date: Dec 2002
Location: Longmont, Colo.
Posts: 187
Car Info: Black WRX, X.S. turbo back exhaust, X.S. cold air, and a lot of plans
There aren't too many tuner "shops". What you need to do is become friends with someone that has the same ecu as you, that way they can teach you how to do it. What ECU are you using anyway? There are a few places that have AWD dynos around, but they are pricie for sure, around $75 to $125 an hour, plus a 1st pull price.
MCL
MCL
02-17-2004, 05:41 PM
#7
Registered User
Thread Starter
Join Date: Jan 2003
Location: Colorado
Posts: 144
Car Info: 2000 2.5 RS USDM STI block, SOHC heads GT25 Ball bearing turbo, TMIC, TXS BOV, Tial wastgate, etc...
The only person that I have run across that has the same ecu as me lives in hawaii..... he is helpful, but it is hard to share info due to the fact that I am about 5000 feet above him in elevation.
This is why I wanted to find a competant mechanic/tuner that could fittle with my setup
This is why I wanted to find a competant mechanic/tuner that could fittle with my setup
02-17-2004, 06:19 PM
#8
Registered User
iTrader: (2)
Join Date: Dec 2002
Location: Mountains
Posts: 4,650
Car Info: 2007 Nissan Frontier
Flat4 Engineering will handle any of your Colorado Subaru tuning needs. They are really great people there too. Good luck!
CHeers
-Jeff
CHeers
-Jeff
02-17-2004, 07:27 PM
#9
Registered User
Thread Starter
Join Date: Jan 2003
Location: Colorado
Posts: 144
Car Info: 2000 2.5 RS USDM STI block, SOHC heads GT25 Ball bearing turbo, TMIC, TXS BOV, Tial wastgate, etc...
I called them and they told me that they werent familiar with my engine management and that I should try nto find someone else.... it is seriously not that complicated. If I had access to a dyno, and a wideband I could tune the damn thing my self.. it is really beggining to frustrate me that something this simple no one is willing to tune it.. you know what I mean?? I mean seriously check it out, it is not that complicated.
www.splitsec.com
`
www.splitsec.com
`
02-18-2004, 02:17 PM
#10
Registered User
iTrader: (2)
Join Date: Dec 2002
Location: Mountains
Posts: 4,650
Car Info: 2007 Nissan Frontier
Who did you call? If you really are just looking for an AWD dyno I belive there are a few around, and from the site it looks like you def. could do it yourself. Avalon motorsports also would be a good place to call.
Cheers
-Jeff
Cheers
-Jeff
Thread
Thread Starter
Forum
Replies
Last Post
EQ Tuning
NorCal Classifieds
757
11-02-2017 05:05 PM
