Does anyone have one they aren't using? I have a 12mm and its not long enough? TRADE?!

 

12mm and 15mm is the diameter of the center holes. not the length

check out the kartboy site, you'll see 12 and 15mm diameters, then lengths
http://www2.kartboy.com/x4/home.php?cat=258


your car is a 2005 Legacy, so you have 12mm diameter hangers
http://www2.kartboy.com/x4/home.php?cat=264


so what you are looking for is:
Kartboy Exhaust Hanger Single EXTRA LONG 12 mm (BLACK)
0.750" longer C-C than stock. 12mm is the diameter of the center holes.
2.375" C-C


or as explained on http://www.fastwrx.com/karexhan.html
Dimensions
Short hanger: 3" long, about 1 3/4" wide, hole center-to-center 1 3/8", 1" thick.
Long hanger: 3 7/8" long, 2 1/8" wide, hole center-to-center 2 3/8", 1" thick.



hope that helps you

 

ooo... well wouldnt 15mm be easier to remove too?

 

15mm would be too big of a hole. the hangers won't be snug properly

just use a bit windex or dish soap in the 12mm hanger hole :O
"Use Windex, according to Tom from KartBoy, any petroleum grease can deteriorate the urethane over time."

 

I have a 12mm kart boy Xl if it will help...

 

pmed.

 

Hey, I got this laying around, told you last night. Let me know when you want it. Hope its not too long.

 

i think it might be too thin. It needs to be sturdy :/ Ill let you know though Ron thanks!

 

Ok. I'll bring it on Wed

 

Thanks @norcalbmxer4u and 12imprezaSL my exhaust now does not hit the driveshaft!