Got a carbon fiber kit and don't know what to do with the old plastic? I need one piece for my dash. Here it is:





Must not have any scratches on it, since the reason I'm buying it is because my current panel is scratched. Thanks!

 

Yeah I would like the lower piece for the same reason... Its the one around the radio and fan controls.

-Joe

 

I have the old dash pieces lying around. That said, I know that I have a minor scratch on one of the three following :

• Piece Joe wants
• Piece Kuonji wants
• The Cupholder

I'll try and dig it out tonight and let y'all know.

 

Thanks! *crosses fingers*

 

Got a chance to look.

The part that Kounji wants has a small (i.e. about 1mm long) scratch in the lower left panel of it.

The part that Joe wants is basically mint. There are a couple of VERY minor surface scratches in it, but not enough to go thru the paint on the plastic part. In other words, you'd never see the scratches when the part was installed in the car.

If you're still interested, PM me.

 

how bout the cupholder??

how much for that? lol

and you got the screws on the holder too?

 

Thanks for checking Impala, but I'll pass this time

 

Oh dude, i so want a new cup holder, the one in my sti is wacked (tray is a little wide and the spring is weak so the tray sucks on the pullout and <--- too lazy to get it fixed @ dealership)

 

Cool so how much for that trim piece?

Also I thought all the cup holders didn't really slide all the way out on their own. Are they suposed to? Mine doesn't.

-Joe

 

Joe : pm sent.

Kuonji : no problem.

Seraph : that is normal on the cupholder. Other than possibly needing to SLIGHTLY adjust it (takes about 2 minutes with a screwdriver), it sounds like it is working as designed. No need to let the dealer molest the car over that one

 

Hate to do this and give the late notice, but looks like I'm not gonna make UCKK tonight. A meeting popped up that I forgot about....

 

No no you don't understand, i guess i was understating when i said it sucks on the pullout.......because i can't even pull it out I push it in and it stays stuck in.

Cupholder in mom's 02 wrx > my 04 STi's

 

Seraph : my cupholder (in my WRX) used to do exactly what you're describing. Like I said, slight adjustment of the 2 screws that hold it in fixed it . Quick tap dead center on it quickly will probably get it to release so you can access those screws.

Unless, of course, you WANT the dealer to say something like "OK, we fixed this cupholder.....time to go TEST DRIVE this guy's car on Skyline Blvd to make sure the fix worked"

 

Still looking for this dash piece in great condition if anyone has to sell!

 

We have a 03 WRX wagon that was wrecked and being stripped. I will start taking pics and posting all the good pieces we will be selling.

PM for parts request.
Already gone:
Engine, tranny, and rear diff.

Kevin at LIC motorsports.