sti motor, tranny, full complete wiring and ecu and more
sti motor, tranny, full complete wiring and ecu and more
I have an sti motor complete with all accessories, full wiring harness and ecu, tranny with driveshaft and rear diff, all four axels and all four hubs. all parts have 16000 miles and i have a can include a copy of the vin and title to anyone who buys.
motor with wiring and ecu
transmission with dccd and controller, clutch, flywheel, shifter assembly, and driveshaft
r180 rear diff with rear hubs and axels
front axels and hubs
ben
motor with wiring and ecu
transmission with dccd and controller, clutch, flywheel, shifter assembly, and driveshaft
r180 rear diff with rear hubs and axels
front axels and hubs
ben
Last edited by BIGBSWRX; Sep 1, 2004 at 02:51 PM.
if you use the r180 diff you would need the rear axels and hubs. if you want to get a 3.90 diff from a older legacy all you need is the driveshaft.
motor and wiring and ecu 5500
tranny, clutch, flywheel, driveshaft, r180 diff, 4 hubs, 4 axels 6500
11000 for both
ben
motor and wiring and ecu 5500
tranny, clutch, flywheel, driveshaft, r180 diff, 4 hubs, 4 axels 6500
11000 for both
ben
motor is being parted out, here are prices
ECU $400
engine wiring harness $100
A/C compressor and belt $100
bypass valve $25
motor mounts $50
injectors $200
complete heads with cams, springs, retainers, coilpacks, valves, etc $1700
short block with oilpan, pump, water jacket, etc $1000
alternator $50
power steering $50
intake manifold w/ tgv, throttle body, and fuel rails $300
complete bulkhead harness $650
exhuast manifold $150
there are a few more parts not listed, let me know if you need something specific. also, the prices do not include shipping and are pretty firm, i will only lower them on combo deals.
ben
ECU $400
engine wiring harness $100
A/C compressor and belt $100
bypass valve $25
motor mounts $50
injectors $200
complete heads with cams, springs, retainers, coilpacks, valves, etc $1700
short block with oilpan, pump, water jacket, etc $1000
alternator $50
power steering $50
intake manifold w/ tgv, throttle body, and fuel rails $300
complete bulkhead harness $650
exhuast manifold $150
there are a few more parts not listed, let me know if you need something specific. also, the prices do not include shipping and are pretty firm, i will only lower them on combo deals.
ben
Last edited by BIGBSWRX; Sep 3, 2004 at 12:07 PM.
many people have sent pms and i am trying my best to respond quickly. i have put names for people who have expressed interest, please let me know if i missed someone. thanks so much for all the interest.
ben
ben


