possibly FS JDM 6MT+rear end+rear brembos
possibly FS JDM 6MT+rear end+rear brembos
Edit: also selling other stuff. also check below for new price on transmission.
Possibly selling a jdm suretrack 6 speed transmission...bought it from a very close friend's dad who runs a shop in taiwan, never installed, told less than 17 k miles
-jdm 6 speed
-6mt shifter linkage, rear 180 differential,driveshaft, rear axles, etc
also have some really tiny racing peddles, believe it comes from spec-c, that ill throw in.
-rear brembos w/lines + rotors
If I get any serious interest I'll pull up the identification number on the tranny. As for price, asking 4,000 for everything. Pick up prefered (everything's already nicely in a huge box on a crate, hopefully you got a truck, as the tranny's very heavy)
Located in san jose, ca. so you can come check it out
Possibly selling a jdm suretrack 6 speed transmission...bought it from a very close friend's dad who runs a shop in taiwan, never installed, told less than 17 k miles
-jdm 6 speed
-6mt shifter linkage, rear 180 differential,driveshaft, rear axles, etc
also have some really tiny racing peddles, believe it comes from spec-c, that ill throw in.
-rear brembos w/lines + rotors
If I get any serious interest I'll pull up the identification number on the tranny. As for price, asking 4,000 for everything. Pick up prefered (everything's already nicely in a huge box on a crate, hopefully you got a truck, as the tranny's very heavy)
Located in san jose, ca. so you can come check it out
Last edited by yungjin; May 22, 2006 at 09:30 PM.
Registered User
iTrader: (38)
Joined: Feb 2004
Posts: 1,361
From: mr. police officer,im not as think as you drunk i am....
Car Info: 02 wrx
What about the front axles,brembos? Hardware for installation? Tranny mount?
Any accidents?
lmk....
Bump for a good price!
Any accidents?
lmk....
Bump for a good price!
There is some pics of the 6spd and components in thier current form.
I'll post up picks of the brembos.
Some behind the scenes info of the tranny... they were purchased by myself from a very close friend's dad. He run's a respected shop called aokracing in taiwan: http://www.a-oktw.com.tw/index.html (lol... yeah yeah I know... thier shop car is an evo *gasp*>_<)
The rear brembos I bought off a member on nasioc.com.
Aright, there seems to be modest interest so far in the jdm 6 spd.
For those that don't know, the jdm 6 speed is the strongest transmission made by subaru, in that it uses steel forks instead of the usdm's dccd tranny which uses aluminum forks.
As I went to snap the pictures of the tranny, I came across some bad news though. Since this tranny has basically been sitting in my garage for half a year, and my dad uses the garage a lot he stored the axles a bit akwardly, and as a result I found a small tear in the black rubber part on one of the axles.
As a result of this I will probably no longer be selling the rear end, as I don't know how much it would cost to repair the black rubber piece on the axle.
So at this point I may just sell the tranny by itself. I wan't to get a fair price for it but, I know much people don't have this much money, and i need money for a down on my next vehicle-- so i'll be willing to sell the tranny, shifter linkage, shift boot console for $3,000. This is a straight up hook-up price, priced to sell -- I WON'T be making any money at this price.
If you want I'll be willing to add in the 180 rear differential, brembos, axles, driftshaft for $3,500 (for those that are mechanically inclined enough to feel that the punctured rubber piece is easily fixable/ replaced--I'm pertty newb to car stuff, so I didn't want to take any chances in selling the rear end with the punctured rubber piece.
)
-----------------------------------
Also I may be selling some assorted goods (I'll post pics of these soon as well):
17x8 WorkMeister S1-1piece rims near mint condition. the offset is about +44, 5x100 thus will fit any wrx or 04 sti.
>will clear brembos<, forged aluminum, bronze, wrapped in RS2 tires with tons of tread left (I barely put on the tires less than 5 months ago).
I think these rims are the perfect look on a subaru, as I just love the thick curvy 5 spoke look.
~~$1,400.
AUTHENTIC JUN front bumper. I just bought this for $1k and waited about 4 months for it to get here from japan. Ready to be painted. once again this is an authentic JUN piece, although you will need a jdm bumper beam for install.
This will fit any 02/03 wrx.
~~$550obo.
Zerosports replica front bumper.
I bought this off a nasioc member for 250... decided I didn't want replica on my car... so never installed. your's for 75 bucks.
Ray's blue lug nuts extended version. Pertty new still. no scratches or paint stripping at all.
new is 150+
yours for $75.
HKS SSQV blow off valve. works great, sounds great.
No hood rash, as it was only used in a bug eye wrx.
$150.
I'll post up picks of the brembos.
Some behind the scenes info of the tranny... they were purchased by myself from a very close friend's dad. He run's a respected shop called aokracing in taiwan: http://www.a-oktw.com.tw/index.html (lol... yeah yeah I know... thier shop car is an evo *gasp*>_<)
The rear brembos I bought off a member on nasioc.com.
Aright, there seems to be modest interest so far in the jdm 6 spd.
For those that don't know, the jdm 6 speed is the strongest transmission made by subaru, in that it uses steel forks instead of the usdm's dccd tranny which uses aluminum forks.
As I went to snap the pictures of the tranny, I came across some bad news though. Since this tranny has basically been sitting in my garage for half a year, and my dad uses the garage a lot he stored the axles a bit akwardly, and as a result I found a small tear in the black rubber part on one of the axles.

As a result of this I will probably no longer be selling the rear end, as I don't know how much it would cost to repair the black rubber piece on the axle.

So at this point I may just sell the tranny by itself. I wan't to get a fair price for it but, I know much people don't have this much money, and i need money for a down on my next vehicle-- so i'll be willing to sell the tranny, shifter linkage, shift boot console for $3,000. This is a straight up hook-up price, priced to sell -- I WON'T be making any money at this price.
If you want I'll be willing to add in the 180 rear differential, brembos, axles, driftshaft for $3,500 (for those that are mechanically inclined enough to feel that the punctured rubber piece is easily fixable/ replaced--I'm pertty newb to car stuff, so I didn't want to take any chances in selling the rear end with the punctured rubber piece.
)-----------------------------------
Also I may be selling some assorted goods (I'll post pics of these soon as well):
17x8 WorkMeister S1-1piece rims near mint condition. the offset is about +44, 5x100 thus will fit any wrx or 04 sti.
>will clear brembos<, forged aluminum, bronze, wrapped in RS2 tires with tons of tread left (I barely put on the tires less than 5 months ago).
I think these rims are the perfect look on a subaru, as I just love the thick curvy 5 spoke look.
~~$1,400.
AUTHENTIC JUN front bumper. I just bought this for $1k and waited about 4 months for it to get here from japan. Ready to be painted. once again this is an authentic JUN piece, although you will need a jdm bumper beam for install.
This will fit any 02/03 wrx.
~~$550obo.
Zerosports replica front bumper.
I bought this off a nasioc member for 250... decided I didn't want replica on my car... so never installed. your's for 75 bucks.
Ray's blue lug nuts extended version. Pertty new still. no scratches or paint stripping at all.
new is 150+
yours for $75.
HKS SSQV blow off valve. works great, sounds great.
No hood rash, as it was only used in a bug eye wrx.
$150.
Registered User
iTrader: (38)
Joined: Feb 2004
Posts: 1,361
From: mr. police officer,im not as think as you drunk i am....
Car Info: 02 wrx
I can't see the half shafts coming out of the tranny or the rear end so I suspect it to be out of a 2006 sti. Or do the jdm trannies have the half shafts connected to the axle?





