Perrin STi Side Feed Injectors, Cusco Sway Bar, Wiseco Forged Pistons
#1
Registered User
Thread Starter
iTrader: (6)
Join Date: Nov 2011
Location: Park City, UT
Posts: 615
Car Info: 2002 WRX Wagon PSM
Perrin STi Side Feed Injectors, Cusco Sway Bar, Wiseco Forged Pistons
So I am posting this for a friend who does not have a forum account. He would prefer local pickup but is willing to ship the injectors. Bellow is what he wanted me to include in the post. If you have any questions, your best option is to text the number included in this post. He would prefer to sell as local pickup for the sway bar in either the Lake Tahoe or Auburn area.
For sale:
4 sti yellow injectors. I bought these from someone who knew very little about these injectors. I did some research and found some info. Apparently Perrin offered a machining service for wrx and sti injectors. These are 04-06 sti injectors (apparently works for 05-06 legacy gt as well), (usually flowing at around 500 cc but i could not find a difinitive number), but after Perrin does their work, they are supposed to be 816 cc. http://www.oakos.com/Merchant2/merch...de=PSP-INJ-200 Perrin modified sti sidefeed latency values on Enginuity? - NASIOC
I have not used these and they appear to be still sealed and new from Perrin.
$290 Shipped
In addition, I'm selling a genuine Cusco 21 mm front sway bar for 02-07 wrx sedan. My friend just installed a 24mm sedan specific front sway bar from whiteline on his wagon. It took a little persuasion but installed fine, and drives great. While this is a sedan specific sway bar, perhaps you could make this one fit on a wagon as well if you try, however I cannot confirm this, I can only confirm that it can be done with whiteline's, but I would imagine they would be the same? These do not include any bushings.
$110 SOLD!!
I also have Wiseco forged pistons 99.5 mm for the 2.5 liter engines. These are 8:9:1 compression ratio according to Rallysportdirect. I have not used these as I won't be able to do a build for a long time, however they are used from the previous owner. With that being said, three of the pistons are immaculate while one piston has a little bit of wear (pock marks on piston head).
$225 Shipped
Mike
530-320-5714
For sale:
4 sti yellow injectors. I bought these from someone who knew very little about these injectors. I did some research and found some info. Apparently Perrin offered a machining service for wrx and sti injectors. These are 04-06 sti injectors (apparently works for 05-06 legacy gt as well), (usually flowing at around 500 cc but i could not find a difinitive number), but after Perrin does their work, they are supposed to be 816 cc. http://www.oakos.com/Merchant2/merch...de=PSP-INJ-200 Perrin modified sti sidefeed latency values on Enginuity? - NASIOC
I have not used these and they appear to be still sealed and new from Perrin.
$290 Shipped
In addition, I'm selling a genuine Cusco 21 mm front sway bar for 02-07 wrx sedan. My friend just installed a 24mm sedan specific front sway bar from whiteline on his wagon. It took a little persuasion but installed fine, and drives great. While this is a sedan specific sway bar, perhaps you could make this one fit on a wagon as well if you try, however I cannot confirm this, I can only confirm that it can be done with whiteline's, but I would imagine they would be the same? These do not include any bushings.
$110 SOLD!!
I also have Wiseco forged pistons 99.5 mm for the 2.5 liter engines. These are 8:9:1 compression ratio according to Rallysportdirect. I have not used these as I won't be able to do a build for a long time, however they are used from the previous owner. With that being said, three of the pistons are immaculate while one piston has a little bit of wear (pock marks on piston head).
$225 Shipped
Mike
530-320-5714
Last edited by 02 bugeye wagon; 12-30-2014 at 12:06 PM.
Thread
Thread Starter
Forum
Replies
Last Post
NorCalDC5
NorCal Classifieds
11
03-06-2010 02:16 AM
dynoflo
Vendor Group Buys/Specials
0
01-23-2004 08:12 PM
dynoflo
Vendor Group Buys/Specials
2
12-09-2003 06:26 PM