Part out 05-09 LGT 08+ WRX
Thread Starter
Nobody likes the tuna here
iTrader: (51)
Joined: Feb 2010
Posts: 19,779
From: Somewhere San Mateo County, Inside A 911 Ambulance
Car Info: 03 SRP WRX Street Class Prepped, 17 Chevy Duramax
Part out 05-09 LGT 08+ WRX
Located on the coastside near Half Moon Bay. I probably won't be able to deliver these parts since I am out a car. Maybe to the Ocha meet on Mondays maybe at Vajayjay too. Money talks because I need it asap towards the next car/truck.
Works on LGT and GD's
Works bell Boss steering wheel hub adapter also http://www.rhdjapan.com/works-bell-s...baru-116-64217 $80
Works on both
Perrin TMIC awesome condition the best I've seen anywhere $475 Sold to BrendanTheGreat
ERZ Catted Downpipe $200 Sold to Chris GTO TT
Legacy GT Engine Cover $60 Sold to WRX Mike
Cobb Heatshield (needs a coat of paint forsure) $40 Sold to NorcalBmxer4u for 9 hours of labor with me, thanks again!
Front Gold Brembos (needs retapping where the bolts go) w/Stoptech Pads 3K on them (Comes with all stuff except bolts, includes pins shims and the metal thing that keeps the pads in. $700 or Trade for 5x100 Wheels with Tires no rotas.
TR Motorsport Rims Traded to twinturbozs
Legacy GT Only
Borla Catback $500 Sold to Chris GTO TT
05-06 LGT ECU with basic map from Ed @ EQ. If you install this on your car you will need your immobilizer re-calibrated with this ECU, yes this ECU has an opensource tune on it, my first one bricked and this one got the map on it and i threw the bricked one back into the car before they took it. Ed can verify this tune for you too. (This should be his base map he uses for all LGT tunes that is what I heard, it's not a full protune so should be fine for any stage 2 application has had no issues with my catted and catless setup, stock or perrin topmount, stock or spt intake) $120
Perrin 22mm rear sway from an outback with spherical endlinks $100 Sold to ImprezaChiang
AVO Reinforcement Brackets $80 Sold to ImprezaChiang
SPT Short Ram Intake with Heatshield $100 (may work with 08+) Sold to ImprezaChiang
JDM single zone din adapter (hvac lights up etc but its not fully functional. needs a bit more work but at least you get a double din) $200 SOLD ON LGT.com
JDM upper cubby (has a bit of a space on passenger side but hardly noticeable) $30
Konis + Swift Springs Traded w/LGT Member
Rear Stoptech Street Pads 3k on them $40 Also fits 02-03 wrx?
All Weather Floor Mats Sold to ImprezaChiang
PM me and I have confirmed its a total and have these parts ready now.
Works on LGT and GD's
Works bell Boss steering wheel hub adapter also http://www.rhdjapan.com/works-bell-s...baru-116-64217 $80
Works on both
Perrin TMIC awesome condition the best I've seen anywhere $475 Sold to BrendanTheGreat
ERZ Catted Downpipe $200 Sold to Chris GTO TT
Legacy GT Engine Cover $60 Sold to WRX Mike
Cobb Heatshield (needs a coat of paint forsure) $40 Sold to NorcalBmxer4u for 9 hours of labor with me, thanks again!
Front Gold Brembos (needs retapping where the bolts go) w/Stoptech Pads 3K on them (Comes with all stuff except bolts, includes pins shims and the metal thing that keeps the pads in. $700 or Trade for 5x100 Wheels with Tires no rotas.
TR Motorsport Rims Traded to twinturbozs
Legacy GT Only
Borla Catback $500 Sold to Chris GTO TT
05-06 LGT ECU with basic map from Ed @ EQ. If you install this on your car you will need your immobilizer re-calibrated with this ECU, yes this ECU has an opensource tune on it, my first one bricked and this one got the map on it and i threw the bricked one back into the car before they took it. Ed can verify this tune for you too. (This should be his base map he uses for all LGT tunes that is what I heard, it's not a full protune so should be fine for any stage 2 application has had no issues with my catted and catless setup, stock or perrin topmount, stock or spt intake) $120
Perrin 22mm rear sway from an outback with spherical endlinks $100 Sold to ImprezaChiang
AVO Reinforcement Brackets $80 Sold to ImprezaChiang
SPT Short Ram Intake with Heatshield $100 (may work with 08+) Sold to ImprezaChiang
JDM single zone din adapter (hvac lights up etc but its not fully functional. needs a bit more work but at least you get a double din) $200 SOLD ON LGT.com
JDM upper cubby (has a bit of a space on passenger side but hardly noticeable) $30
Konis + Swift Springs Traded w/LGT Member
Rear Stoptech Street Pads 3k on them $40 Also fits 02-03 wrx?
All Weather Floor Mats Sold to ImprezaChiang
PM me and I have confirmed its a total and have these parts ready now.
Last edited by Heedz; Nov 29, 2012 at 12:39 PM.
Thread Starter
Nobody likes the tuna here
iTrader: (51)
Joined: Feb 2010
Posts: 19,779
From: Somewhere San Mateo County, Inside A 911 Ambulance
Car Info: 03 SRP WRX Street Class Prepped, 17 Chevy Duramax
Registered User
iTrader: (8)
Joined: Mar 2012
Posts: 2,047
From: Modesto, California
Car Info: 2008 SSM WRX Premium
Sorry to hear about the LGT, glad to see your alright. Will the engine cover work in my 08 WRX? If so, I'm interested (dibs! Lol)
Last edited by WRX~Mike; Nov 12, 2012 at 09:48 AM.
Registered User
iTrader: (8)
Joined: Mar 2012
Posts: 2,047
From: Modesto, California
Car Info: 2008 SSM WRX Premium
Originally Posted by Heedz
It it because of disruptive air on the turn?
Registered User
iTrader: (11)
Joined: Nov 2010
Posts: 2,196
From: Morgan Hill
Car Info: 2011 WRX Sedan
Registered User
iTrader: (24)
Joined: Jan 2007
Posts: 1,831
From: Walnut Creek/BayArea, CA
Car Info: 2009 WRB WRX Sedan
It had to do with something stupid. Some say design and some say tuning. They made a test one or something like that and didnt get it right... It was weird. Shortly after though Cobb is starting to make something.
http://www.iwsti.com/forums/ecu-tuni...ke-08-sti.html
http://www.iwsti.com/forums/ecu-tuni...ke-08-sti.html
Last edited by hwob90; Nov 13, 2012 at 01:46 AM.
