Momo steering wheel...
Thread Starter
Registered User
iTrader: (4)
Joined: Apr 2012
Posts: 302
From: Bay area!
Car Info: MAD STI
Momo steering wheel...
Hello every1
I got a momo steering wheel and I'm trying to install it on a 07 GD STI, but I only have the wheel, I'm looking for the NRG hub adaptor? what kind of resister should I use and how to install the resister!? thank you for your help!!
Sean
Sent from my iPhone using i-Club
I got a momo steering wheel and I'm trying to install it on a 07 GD STI, but I only have the wheel, I'm looking for the NRG hub adaptor? what kind of resister should I use and how to install the resister!? thank you for your help!!
Sean
Sent from my iPhone using i-Club
Nobody likes the tuna here
iTrader: (51)
Joined: Feb 2010
Posts: 19,779
From: Somewhere San Mateo County, Inside A 911 Ambulance
Car Info: 03 SRP WRX Street Class Prepped, 17 Chevy Duramax
resistor for the airbag? they have them on sale at rallysportdirect, I don't know the exact resistance, I don't wanna pull off the casing mine has but I would get the one from them because you will know it's the right one.
You need a 3.3ohm 1/4W-1W 5% carbon resistor. You will no longer find them from radioshack. Bend the resistor so that each prong goes into the two leads on the dash side of the harness. Use some electrical tape to keep it from ever popping out.
Nobody likes the tuna here
iTrader: (51)
Joined: Feb 2010
Posts: 19,779
From: Somewhere San Mateo County, Inside A 911 Ambulance
Car Info: 03 SRP WRX Street Class Prepped, 17 Chevy Duramax
Where they at now mikey?
You can buy them online, but you have to buy them in bulk. Or buy from nasioc ppl who have already bought them in bulk. Or one of those specialized electronic stores that isnt chained. Or get a boss kit that has all the connections with horn relay ready.
Or **** air bags Cuz RaceCarzzzzzzzz
Or **** air bags Cuz RaceCarzzzzzzzz
I'd take a picture, but its really not even that worth it. Like I said, the resistor has two ends. Bend those ends and jam them into the connectors leading back to the airbag sensor on the harness, and call it a day.
Thread Starter
Registered User
iTrader: (4)
Joined: Apr 2012
Posts: 302
From: Bay area!
Car Info: MAD STI
After a while I finally had the time to install everything on, I used the boss kit with the 2W resister and the airbag light came on so I took it to a shop to do a reset but it didn't go, so I used the 3.3 resister and went again to do the reset but it didn't work out, here's a picture of the codes!
Sent from my iPhone using i-Club
Sent from my iPhone using i-Club
After a while I finally had the time to install everything on, I used the boss kit with the 2W resister and the airbag light came on so I took it to a shop to do a reset but it didn't go, so I used the 3.3 resister and went again to do the reset but it didn't work out, here's a picture of the codes!
Sent from my iPhone using i-Club
Sent from my iPhone using i-Club