Local Install Specials for the rest of June!
Thread Starter
Former Sponsor
iTrader: (39)
Joined: Nov 2002
Posts: 6,453
From: San Jose
Car Info: Evo X, 04 STI, 335i, Fit
Local Install Specials for the rest of June!
Perrin Pulleys are back in stock and we are offering our local installed pricing again!
This pulley is not under driven and will not affect the life of your engine. Its 4lbs lighter then stock too!
Local price $125 installed OTD!! *Price good for manual trans equipped Subys only*
02-04 WRX steering rack bushings!
Whiteline Steering Rack Bushings for 02- 04 WRX/STI $55 installed OTD!!
Whiteline Rear Diff Bushings
$50 installed OTD
Oh and..... Our 2nd lift is up!!!! :RockOn - not mine:
Give us a call to make an appointment! (510) 226-8822
Most MWF are open for afternoon small jobs.
Rob @ SpeedElement
This pulley is not under driven and will not affect the life of your engine. Its 4lbs lighter then stock too!
Local price $125 installed OTD!! *Price good for manual trans equipped Subys only*
02-04 WRX steering rack bushings!
Whiteline Steering Rack Bushings for 02- 04 WRX/STI $55 installed OTD!!
Whiteline Rear Diff Bushings
$50 installed OTD
Oh and..... Our 2nd lift is up!!!! :RockOn - not mine:
Give us a call to make an appointment! (510) 226-8822
Most MWF are open for afternoon small jobs.
Rob @ SpeedElement
Registered User
iTrader: (25)
Joined: Jan 2005
Posts: 12,777
From: Kansas - BAIC 4 LIFE!
Car Info: 96 Brighton Coupe Swap
So the pully will just be lighter and alow the motor to rev more freely right? Also is there a big notice in how the car feels while driving with the rear diff bushings or is it made so that the rear diff doesn't "thump" so hard when driving like a bat outta hell? 
Thread Starter
Former Sponsor
iTrader: (39)
Joined: Nov 2002
Posts: 6,453
From: San Jose
Car Info: Evo X, 04 STI, 335i, Fit
Yes to the pulley. The rear diff bushings = Fitting this kit will reduce rear-end float under acceleration and drivetrain "thump" under hard gear changes 
Chicks dig me. April Fool's!
iTrader: (31)
Joined: Apr 2006
Posts: 10,989
From: Fremont, CA
Car Info: 1997 Impreza, 2014 BRZ
I have the Perrin Lightweight pulley on my L. It is great. In terms of power mods, it was the thing that was most noticeable. Pretty much, power came in a whole lot cleaner in my opinion.
Hey guys,
Got time tomorrow (Wed, June 13) lae in the day, like 5:30pm/6pm for a header swap? It takes me about 3 hours start to finish by myself at home (jack one side, stand, jack other side, stand, unbolt everything, prep gaskets, put on header, tighten bolts, check for leaks, and then put the car down again) and I bet you can do it in about 30mins, lol. Lemme know!
Thanks,
-Gagan
Got time tomorrow (Wed, June 13) lae in the day, like 5:30pm/6pm for a header swap? It takes me about 3 hours start to finish by myself at home (jack one side, stand, jack other side, stand, unbolt everything, prep gaskets, put on header, tighten bolts, check for leaks, and then put the car down again) and I bet you can do it in about 30mins, lol. Lemme know!
Thanks,
-Gagan
Thread Starter
Former Sponsor
iTrader: (39)
Joined: Nov 2002
Posts: 6,453
From: San Jose
Car Info: Evo X, 04 STI, 335i, Fit
Hey guys,
Got time tomorrow (Wed, June 13) lae in the day, like 5:30pm/6pm for a header swap? It takes me about 3 hours start to finish by myself at home (jack one side, stand, jack other side, stand, unbolt everything, prep gaskets, put on header, tighten bolts, check for leaks, and then put the car down again) and I bet you can do it in about 30mins, lol. Lemme know!
Thanks,
-Gagan
Got time tomorrow (Wed, June 13) lae in the day, like 5:30pm/6pm for a header swap? It takes me about 3 hours start to finish by myself at home (jack one side, stand, jack other side, stand, unbolt everything, prep gaskets, put on header, tighten bolts, check for leaks, and then put the car down again) and I bet you can do it in about 30mins, lol. Lemme know!
Thanks,
-Gagan
Rob
Thread Starter
Former Sponsor
iTrader: (39)
Joined: Nov 2002
Posts: 6,453
From: San Jose
Car Info: Evo X, 04 STI, 335i, Fit
PM'd you. Labor is $50 on the 05+ bushings
Hit me up when you get back and I'll see what I can do depending on stock.
Rob
Hit me up when you get back and I'll see what I can do depending on stock.
Rob
