STRUTS and REAR GROUP Ns are sold.


I recently traded my 02-03 Ground control coilover kit for an brand new in box 2004 STi conversion kit. These will probably work on most WRX models. Please do your research. See below for details.

Selling my custom assembled Ground Control+Koni coilover setup.

All parts are for 2002-2003 WRX and have about 15k miles on them. May fit other models, please do your research!
I took this setup off my bugeye before I sold it.

Buy as a complete kit for $1,100 or buy just what you need.

Available for pickup in Berkeley






1) 2004 STi Ground Control coil over conversion kit (brand new in box) with Eibach springs: 400lbs front, 400 rear (front spring is 6" long, rear is 7", both are 2.5” ID). Comes with Ground Control bumpstops specific to this application. $275







2) Ground Control front camber plates $280

http://www.ground-control-store.com/.../II=150/CA=193

 

This is about how my car sat with this setup.





You can get at least -3 degrees camber with these camber plates and camber bolts.

 

bump.

 

Never mind, read the whole post.

 

Different springs with custom rates can easily be ordered from ground control. They aren't too expensive either. Probably around $200 or less if you call.

I found the 400/350 rate to be stiff, but streetable if you don't mind a few jolts over the big bumps.

 

bump for a nice set-up! What did you get to replace the bugeye?

 

Tuition. Ha! Waiting for an unmolested 240 or B13 SE-R to come my way. The bugeye was too expensive to track.

 

bump.

 

bump.

 

bump.

 

bump.

 

Wish this fit my '03 wagon. I'd be running with cash for the Konis if it did. Bump for you.

Jimbo

 

koni struts and group n top hats are sold.

 

bump.

 

bump.