Hey all,

We've got a new product that we're really excited about: SMC Alcohol Injection. It's got a ton of potential but it's still a very cost effective mod. Designed to be a hassle free upgrade, this package includes everything you need to get alcohol injection running properly on your car. Although many people are “scared” of alcohol injection, if utilized properly, it is perfectly safe while also being one of the best bang for the buck power adders available for a boosted car. Alcohol injection works by injecting a fine mist of alcohol into the intake stream. This does two important things:

1) Alcohol Injection lowers the temperature of the intake charge to create a denser (and thus greater) air mass.

2) Alcohol Injection raises the effective octane of your fuel which works towards avoiding detonation (the sworn enemy of engines).

These two factors are particularly beneficial on turbocharged cars because the effectiveness of turbocharging is dependent on having a dense and cool intake charge while also avoiding detonation. Boosted engines are particularly succeptable to detonation because they can see such high pressures and temperatures. By increasing the effective octane of your fuel, it allows you to run higher boost and add more timing advance. It is not uncommon to see HP gains as high as 20-30% with these changes, regardless of modifications. Additionally, two added bonuses of alky injection are that it also cleans your engine and will work with pump gas.


*Dyno graph taken from 2.35L running GT35R w/ supporting mods.

The SMC Alcohol Injection System is unique, reliable, and safe in several regards. Designed from the ground up specifically for the Subaru WRX and STi, this system includes a 1 gallon washer fluid tank that serves as a reservoir. This makes for a very simple and stealthy install. A small auxilliary washer tank/pump that mounts in front of the battery is also included so that you can still clean your windshield. Another unique feature of this kit is the Progressive Controller. An extremely small unit that can be fitted nearly anywhere (it measures only 2.75" wide x .9" high x 4.6" deep), this microprocessor based device will automatically increase alcohol spray pressure as boost rises. This system runs on denatured alcohol that can be bought nearly anywhere.

As is wise when running high boost levels, tools critical to tuning are highly recommened to be used in conjunction with this kit. A wide-band 02 controller, knock link, and tuning are suggested.

- Increase effective octane of fuel
- Drastically decrease temperature of intake charge
- Allows higher boost and more timing advance
- Expect 20-30% HP increases
- Stealth installation

SMC Alcohol Injection - $499 Shipped!

We are offering the following packages:

SMC Alcohol Injection + Link Knock Link + PLX M300 Wideband - $1099 Shipped!

This combo includes everything you will will need (short of EM) to tune and safely run alky injection on your car. When running at high levels of boost, it is absolutely critical to monitor knock so that your engine doesn't blow itself up. The PLX wideband is one of the best on the market and will ensure that you are running at optimum AFRs.



SMC Alcohol Injection + Cobb Acessport + Link Knock Link + PLX M300 Wideband - $1649 Shipped for WRX!
$1699 Shipped for STi

This combo includes everything you will will need (including EM) to tune and safely run alky injection on your car. When running at high levels of boost, it is absolutely critical to monitor knock so that your engine doesn't blow itself up. The PLX wideband is one of the best on the market and will ensure that you are running at optimum AFRs. Finally, the Cobb AP is argualbly the most versatile engine management solution on the market allowing for multiple map capability and full control over the ECU's parameters. You will need a Protune with this setup.



Other tuning solution packages:

If you consider your engine a worthwhile investment (which I think most of you do), you might want to consider this little insurance policy:

An extremely valuable tuning tool and problem indicator, the Link Knock Link w/ Bosch Knock sensor is a critical component for the highly modified engine. Highly modified engines run the thin line between peak power and engine failure. This failure is often caused by detonation. The Knock Link uses a highly sensitive (and superior) to stock) Bosch knock sensor that is extremely sensitive to detonation. The Knock Link alerts you the moment detonation is occurring; not after you've finished looking at your data logs or blown your motor. The Knock Link can protect your motor while tuning or simply when you get a bad tank of gas. It is our opinion the Knock Link belongs right next to the Wide Band O2 sensor and is a necessity for the highly modified engine; think of it as cheap insurance to protect your high performance (and expensive) motor.

-Monitor real-time knock.
-Optimise advance.
-An excellent saftey measure for heavily modified engines




We are offering the following package:

-Cobb Accessport
-1 Custom Map for your car tuned by Mike (must be standard bolt on modifications)
-Link Knock Link
-Bosch Knock sensor
-Installation

$1099 OTD (includes tax!) for WRX
$1149 OTD (includes tax!) for STi
$249 Shipped for just the Knock Link and Sensor

Thanks,

Preston
preston@gruppe-s.com
510-783-5300

 

Exhausts:

Greddy SP2 Catback- 02+ WRX / 04+ STI
The Greddy SP2 exhaust for the Subaru WRX/STi is one of the quietest exhaust systems on the market. Made from Full Stainless Steel. Full 80mm mandrel bent piping.
$529 shipped!!!


Borla Hush Catback- 02+ WRX / 04+ STI
The Borla Hush exhaust for the Subaru WRX/STi is also one of the quietest exhaust systems on the market. It also features a very stock looking twin-tip design which is always nice if you're not trying to attract attention from the authorities. Made from Full Stainless Steel. Full 80mm mandrel bent piping. Available with 3" downpipe adapter flange at extra cost.
$PRICE TOO LOW TO POST!!!


Helix is back in stock!

Mix and match to create your own packages w/ the above catbacks! Contact us for pricing.

Helix Catted Downpipe: $399 shipped
-Full 3" bellmouth design
-Will pass emissions sniffer test (but not visual inspection)


Helix Catless Downpipe: $285 shipped
-Full 3" bellmouth design


Helix TMIC: $599 Shipped
-Ideal for VF34 size turbo upgrades
-Proven to be more efficient than the JDM STi TMIC.
-Proven to make power.


Gruppe-S V2 Headers: $399 Shipped
-Dyno proven to gain HP and TQ
-Full Stainless steel


Helix Flex Uppipe: $175 shipped
-Best bang for the buck upgrade power upgrade for the WRX
-Eliminates factory cat in WRX uppipe


Gruppe-S V2 Header + Helix Flex Uppipe Combo $450 Shipped

Other items:

Helix Catch Can - $75 Shipped
The Helix Catch Can is designed to trap oil moisture and blow-by caused by normal engine operation, especially in turbo charged vehicles. This debris will tend to accumulate inside the intake tract, intercooler, turbocharger, as well as be ingested into the engine during normal combusion process. Needless to say, this sludge and blow-by will hurt the performance of your vehicle.


Gruppe-S Carbon Fiber Radiator Shroud- 02+ WRX / 04+ STI
Approximately 20% of incoming air current is diverted away from the radiator by the radiator support. The radiator shroud reduces this loss, by redirecting airflow over the radiator. The result is an increased cooling efficiency of the radiator. The Gruppe-S Carbon Fiber Radiator shroud is made from high quality dry carbon fiber to insure that it is as light as possible.
$99 Shipped!!!


Gruppe-S Heat Shield- 02-05 WRX
This heatshield will lower your underhood operating temperatures by directing heat from the turbo and downpipe away fromt your TMIC and the rest of your engine. This will in turn lead to more power from cooler intake temperature and better engine operating conditions.
$49 Shipped!!!


Thanks,

Preston
Phone: (510) 783-5300

We Accept Paypal!
Paypal: sales@gruppe-s.com
When ordering w/ paypal, please include the following:
product name: XXXX
sales rep: Preston
Price including shipping: $XXXX
Shipping address.