2015 Base STi Wheels ONLY
- wheels are still in the car. 1 wheel has a minor curb rash & 2nd wheel has penny size curb rash. TPMS & TIRES are not included but will include STi valve stem caps
- WHEELS only
- TPMS/VALVE STEM CAPS, CENTERCAPS & TIRES are not included
- they are still on the car and i have currently 400 miles
- will remove once i get a buyer
- SOLDACTUAL PICS






HID Powerhouse Map/Dome LED Lights

• K-Spec 15 LED Panel Super White Domelight LEDs (Stage 4)
• NX-600 COB Festoon Super White Domelight LEDs (Stage 3)

- $43.00 picked up for both

Dome Light ONLY


Dome & Map Lights


BNIB Bosch EC6 Compact Plus Kit
- $47.50 picked up



how they sound:devil:

BNIB Advan Center Cap - High Cap (Light Brown Alumnite) x4

These centre caps are optional parts due to the fact that most people run the Racing wheels without caps on the circuit. If you have purchased the wheels for road use then these will complete the wheels visually and enhance the appearance further.

These caps are designed to fit Advan Racing wheels.

- sold the RG2's and have no use for these anymore
- 4 centercaps
- BNIB
- High Type (Light Brown Alumnite)
- size: 73 mm (for 5x114.3 PCD wheels)
- part# ADVAN-Z8061
- SOLD
- actual pics below





BNIB Parking Armor 3.6 & Platepocket by Bumptek

- ordered this for my STi but i thought shop will fix it but did not
- best accessories if you park/live in busy city (PARALLEL PARKING SUCKS!)
- see pictures for reference
- $95.00 FIRM picked up for both

PARKING ARMOR 3.6 (REAR BUMPER PROTECTOR)
Rear Bumper Protector Provides Attractive Protective Barrier
The solution? Rear car bumper protection by ParkingArmor. For the ultimate car bumper protection the Parking Armor rear bumper protector places 2" inches of thick foam between your car bumper and the car parked directly behind you. This protective barrier keeps protruding license plate bolts and frames from making direct contact with your car bumper. The ParkingArmor rear bumper guard will take the abuse, leaving your car bumper safe.

Superior Rear Bumper Protection -- Size Matters
ParkingArmor rear bumper protector was designed to protect your parked car from low impact parking bumps that would normally scratch a car bumper. While there are many car bumper guard options, many of these products are to small and not thick enough to provide adequate rear bumper protection. As such, when designing the Parking Armor rear bumper protector we set out to develop a rear bumper guard that provides superior rear car bumper protection for your parked vehicle.

Perfect Rear Car Bumper Protection For Street or Parking Garage:
A quality rear car bumper protector can help protect a parked car from the bumps and bruises of parallel parking. The problem? Sharp screws and steel license plates can easily scratch and tear your rear bumper. The solution? ParkingArmor rear bumper guard is the perfect rear bumper protection. How does it work? A rear car bumper guard provides a physical barrier to stop parking bumps from making direct contact with the painted surface. Why ParkingArmor? It's the biggest, thickest car bumper protection out there. Don't settle for lesser quality car bumper protectors.

Rear Car Bumper Guards - A Must Have Accessory For Your Parked Car!
Finally, a rear car bumper guard designed with your car in mind. Our goal was to develop car bumper guard that would provide superior rear bumper protection for a parked car. The objective was to design a car bumper protector that would provide an energy absorbing barrier to minor parking bumps. Innovation, quality materials and ergonomic design have helped the ParkingArmor bumper protector evolve into one of the best rear car bumper protectors on the market. So, when it comes time to choosing a rear bumper guard, don't settle for cheap quality plastic bumper guards or mat style car bumper protectors that offer little rear bumper protection. Get the #1 rear bumper guard for the best rear bumper protection.

Value Added Features Make Parking Armor Rear Bumper Protector #1

-Lightweight rear bumper guard with a 2" inch thick foam core
-Water proof, washable, outer covering
-Anti-theft steel reinforced straps
-FlexBody Structure For Superior Fit
-Waterproof straps will not absorb water
-Hi-Density Foam Core
-Anti-Slip Pads on Backside

PlatePocket by BumpTek (CLASSIC EDITION)
Our original and most popular bumper guard is the perfect balance of protection and style. At 1.65 pounds the classic edition is no lightweight. The flexible rubber material compresses to block minor parking impacts that would otherwise scuff a bumper. Extra thick construction provides added strength, durability and support. With its lower profile design the classic edition complements any vehicles style, while not attracting attention.

PRODUCT INFORMATION
BumpTek is made from a super durable soft flexible rubber that compresses and flexes on impact -- cushions minor parking bumps. The specially formulated rubber material can withstand hot and cold climates - remains flexible even at freezing temperatures. Will never crack or rust like metal or plastic license plate frames. BumpTeks patent pending Kangaroo pouch system completely encases the license plate in rubber. Simply insert your license plate into BumpTeks top open slot and bolt to your vehicle's front bumper.

MATERIALS:
BumpTek is made from a super durable soft flexible rubber

FEATURES:
-Soft Flexible Rubber: Compresses and returns back to its original shape.
-Kangaroo Pouch System (Patent Pending): Fully encases the license plate.
-Recessed Screws: Mounting screws are recessed into the rubber frame, no protruding screws that can damage other vehicles.
-Stealth Design: Complements any vehicle style without drawing attention.
-All Weather Rated: Can withstand hot and cold temperatures.

[B][SIZE="4"]2015 WRX/STi OEM STi Rear Under Spoiler
- decided to go to a different
- both brand new
- opened to inspect (will take actual pictures tonight)
- SOLD

SSR GTV01 18x8.5 +40
- 5x114.3 bolt pattern
- MATTE BLACK in color
- no curbage
- less than 2000 miles (NO CAMBER WEAR)
- will come with TIRES (Nankang Noble Sport 215/40/18 - 90% tread left)
- NO TPMS
- $1,950,00 SHIPPED nationwide or $1,800.00 PICKED UP obo
- retails $1700+ just the wheels ALONE!
- see actual pics below