FS: Perrin 4-POT
#1
Old School
Thread Starter
iTrader: (6)
Join Date: Jan 2001
Location: Union City
Posts: 14,983
Car Info: '99 RBP GM6
FS: Perrin 4-POT
$200
$220 Shipped
Black Color. Extra Cotterpins.
Currently have some Cobalt Friction GT Sports on them. These are a RACE ONLY PADS, that I ran on the street. They took at least 1 or 2 easy stops to get warm enough in the winter. Starting temp is 75F, so they worked ok 9 months out of the year.
You can get almost any brake pad for these calipers. HB-100 pad size for Hawks. Pads, no matter who makes them, run about $50.
It's a kit with pretty good modulation. I think it would work really well on a light car, like an L or RS.
Reason for selling: Too latent for AutoX. I needed something that bit right away. These would pretty well at the track if you had good rotors like DBAs.
-Gagan
$220 Shipped
Black Color. Extra Cotterpins.
Currently have some Cobalt Friction GT Sports on them. These are a RACE ONLY PADS, that I ran on the street. They took at least 1 or 2 easy stops to get warm enough in the winter. Starting temp is 75F, so they worked ok 9 months out of the year.
You can get almost any brake pad for these calipers. HB-100 pad size for Hawks. Pads, no matter who makes them, run about $50.
It's a kit with pretty good modulation. I think it would work really well on a light car, like an L or RS.
Reason for selling: Too latent for AutoX. I needed something that bit right away. These would pretty well at the track if you had good rotors like DBAs.
-Gagan
#6
Old School
Thread Starter
iTrader: (6)
Join Date: Jan 2001
Location: Union City
Posts: 14,983
Car Info: '99 RBP GM6
Lawmany gets the special sauce tonight for the bump
Remember, I'm totally honest. Tell me what you do with you car or planning to do, and I'll tell you if these are right for you. I needed a brake system for Auto-X, and this caliper design is not for that. This design will work great on the street with street pads, or street/hard driving/canyon runs with a more agressive pad like HPS+ or Poterfield's.
I am giving you a set of Cobalts. Cobalt doesn't make pads for the street, this is their lowest level pad, and HAS TO HAVE 75F of temp to even BEGIN to work. They get warm on a moderate brake within a second, but that too slow for auto-Xing. "ok" for the street if you are not a tail gaiter and probably just badass on the track.
No brake pade will fit perfectly, remember, these are race calipers. HB-100 is the size for the pads, and they will need to probably have the center hold in the back plate drilled a few millimeters larger to get a nice fit. The cotter pins i have are from Home Depot, and are VERY thick. They will help in keeping the pad from jiggling around. These calipers aren't quiet. They do make noise. It's the pad kinda jiggling around. Its a single cotter pin design, so you have to take that into account for noise.
-Gagan
Remember, I'm totally honest. Tell me what you do with you car or planning to do, and I'll tell you if these are right for you. I needed a brake system for Auto-X, and this caliper design is not for that. This design will work great on the street with street pads, or street/hard driving/canyon runs with a more agressive pad like HPS+ or Poterfield's.
I am giving you a set of Cobalts. Cobalt doesn't make pads for the street, this is their lowest level pad, and HAS TO HAVE 75F of temp to even BEGIN to work. They get warm on a moderate brake within a second, but that too slow for auto-Xing. "ok" for the street if you are not a tail gaiter and probably just badass on the track.
No brake pade will fit perfectly, remember, these are race calipers. HB-100 is the size for the pads, and they will need to probably have the center hold in the back plate drilled a few millimeters larger to get a nice fit. The cotter pins i have are from Home Depot, and are VERY thick. They will help in keeping the pad from jiggling around. These calipers aren't quiet. They do make noise. It's the pad kinda jiggling around. Its a single cotter pin design, so you have to take that into account for noise.
-Gagan
Last edited by joltdudeuc; 09-10-2005 at 11:47 PM.
Thread
Thread Starter
Forum
Replies
Last Post
xoaox
NorCal Classifieds
2
03-09-2005 12:54 AM
STi Ver 1
Used Aftermarket Car Parts For Sale
2
01-11-2004 05:52 AM
RS TURBO
Suspension, Handling, and Brakes
10
04-08-2003 05:22 PM