FS- Norcal- Rallitek 22mm FSB + HD Endlinks
Thread Starter
Registered User
iTrader: (1)
Joined: Oct 2009
Posts: 64
From: Sacramento, CA
Car Info: 05' LGT Stg. 2
FS- Norcal- Rallitek 22mm FSB + HD Endlinks
Up for sale are my recently removed Rallitek 22mm front sway bar and two sets of Rallitek HD front endlinks. I removed the FSB because I felt was overkill for the 19mm rear bar I have installed. Rather than buy a 25mm bar for the rear to compensate, I decided to pull these pieces off and replace them with stock, mainly because I promised myself I wouldn't spend any more money on the car, lol. I also have a set of HD endlinks that have about 3k miles on them. The set of endlinks has only three of the four mounting bolts, you could probably get a replacement from Rallitek directly very cheaply.
Asking price:
-FSB- $80 picked up or met halfway in Norcal.
-FSB and one set of endlinks (missing one bolt) as a package- Endlinks SOLD
-HD endlinks missing one bolt by themselves- SOLD
Asking price:
-FSB- $80 picked up or met halfway in Norcal.
-FSB and one set of endlinks (missing one bolt) as a package- Endlinks SOLD
-HD endlinks missing one bolt by themselves- SOLD
Last edited by Legacy007; Jun 4, 2011 at 07:10 PM.
Thread Starter
Registered User
iTrader: (1)
Joined: Oct 2009
Posts: 64
From: Sacramento, CA
Car Info: 05' LGT Stg. 2
I mis-wrote the ad. I had two sets of endlinks, but the complete set is sold already. I have one set of endlinks now, and the set of endlinks I have is missing one bolt. There are supposed to be four bolts, two on each side, and I have only three. I'm sure it would be pretty cheap to pick up the last bolt, I believe they're 17mm.
Nobody likes the tuna here
iTrader: (51)
Joined: Feb 2010
Posts: 19,779
From: Somewhere San Mateo County, Inside A 911 Ambulance
Car Info: 03 SRP WRX Street Class Prepped, 17 Chevy Duramax
What set up were you running with this and did you feel more understeer?
Thread Starter
Registered User
iTrader: (1)
Joined: Oct 2009
Posts: 64
From: Sacramento, CA
Car Info: 05' LGT Stg. 2
I ran this front bar and a rallitek 19mm rear bar. I felt a small amount of understeer, nothing too extreme. A larger or same size rear bar would help with that I imagine.
Thread Starter
Registered User
iTrader: (1)
Joined: Oct 2009
Posts: 64
From: Sacramento, CA
Car Info: 05' LGT Stg. 2
It'd have to be a bit more than that. The bar's in great shape.
Yes, the lateral locks prevent the bar from moving side to side, and are included. The bushings are in great shape, less than a year of driving on them, probably 9k miles. No rust on the bar at all, it's less than a year old as well.
Yes, the lateral locks prevent the bar from moving side to side, and are included. The bushings are in great shape, less than a year of driving on them, probably 9k miles. No rust on the bar at all, it's less than a year old as well.