FS: (NorCal) Part Out! DMS, AEM EMS, Perrin Rotated, Headers, Aeromotive, TGV's!
06-21-2010, 11:17 PM
#1
Registered User
Thread Starter
iTrader: (5)
Join Date: Nov 2006
Location: Davis CA
Posts: 611
Car Info: prius drivers crazy. ****ing ***wipes...
FS: (NorCal) Part Out! DMS, AEM EMS, Perrin Rotated, Headers, Aeromotive, TGV's!
UPDATE!
I'm getting so many PM's and its getting hard to reply to on the go
please try to PM me your phone number if you're really interested in anything
I'll PM you mine, and we can work out a time for pickup!
THANKS!
OK, I'm going back to stock and also selling a bunch of stuff that i planned to put on my car.
Reason for selling is that I have to sell my car. I'll get pics up tomorrow when I get access to a camera.
Items are for pick up in Davis CA. Shipping can be arranged at buyer's expense, but most of the items are big and shipping wont be too cheap.
I'm pretty firm on prices as I think what I've listed is very very reasonable.
----Parts already off the car----
1. DMS 50mm Coilovers $2800.
Used just ONE HUNDRED freeway miles after FULL rebuild facilitated by LIC motorsports and PSI @ infineon raceway.
Comes with dyno charts from last week for front and rear. Recommended spring rate: 400lb/in ~ 500lb/in.
Also included are front (v1) and rear (v2) DMS camber plates. Rears are brand new and fronts are used in good condition.
Will throw in some tein springs if you want them...
::Billet ****::
2. Element GT55 Rotated turbo$600
2.5 inch turbo inlet/outlet
Turbo has 600 miles on it in like-new condition
Turbo hotside is coated with jethot coating.
T31 4-bolt, .63 A/R Exhaust Housing.
Turbo should basically perform like a ATP3071 but more power up top thanks to a larger hotside.
2(a). PERRIN v1 rotated uppipe and downpipe. Sold Sold Sold
3. Aeromotive fuel rails (no lines). BNIB Sold Sold Sold
4. Stock STi Fuel Pump Best Offer
5. AEM EMS with AEM ebcs, AEM 3.5 BAR MAP sensor, COBB Map sensor adapter, and AEM IAT Sensor - Sold Sold Sold. Bought used, never installed. COBB adapter is brand new and hard to find.
6. Perrin FMIC core with counterclockwise flow piping $650.
Not the best/smoothest welds on the cold side.
The core was damaged in shipping but re-welded and pressure tested to 80 PSI. Cold side piping tapped for AEM IAT sensor, but can be plugged.
Bought used and never installed.
Tial BOV flange is welded on as well.
Comes with FMIC mount/bumper beam replacement.
7. Advan RCII 17x9.5 +35 in silver 5x114.3 $1100
Test fit one wheel once, and that's it! Tires never mounted to them. Basically brand new.
8. TOP Feed WRX TGV Deletes. Sold Sold Sold
Bought used, never installed.
9. Injector Dynamics ID1000's Sold Sold Sold
BNIB - includes plug-n-play wiring harnesses.
10. WC Lathe Werks Copolymer Teardrop Shift **** - WHITE Sold Sold Sold
11. Killer B Motorsports Delrin Teardrop Shift **** - BLACK Sold Sold Sold
12. Hardened Exhaust Hangers - All Brand New:
4 x Paranoid Fab Green - Sold Sold Sold
2 x Kartboy Black - Sold Sold Sold
----Off the car now, as well----
1. Cobb AP v2 - $Sold Sold Sold
2. Helix Catless DP Sold Sold Sold
Tapped for Wideband O2 Sensor
Painted Black
3. Pioneer AVH-P4100 DVD. Sold Sold Sold
4. JIC Spartan Full Titatium Exhaust. Sold Sold Sold
The 2.5 Inch taper was cut off and a 3 Inch OD slip-in flange is installed for a full 3-inch exhaust that's ridiculously light.
5. Gruppe-S Equal Length Headers. $500
Used for 5500 Miles. I'm the second owner after alcoolaid.
Painted, wrapped, then coated again. Used DEI Titanium wrap and DEI silicone coating.
About $150 in coating alone without labor!
Wrap/Coating is only 1000 miles old.
6. PLX DM-200 with SM-AFR;EGT;BOOST modules. Gone
Willing to give you $50 value for your OEM boost gauge (year doesnt matter, as long as it works)
7. P&L Braided Stainless Steel AVCS Oil Line BNIB, but no box $100
8. Leftover DEI Titanium Exhaust Wrap 2" Sold Sold Sold
Good amount left. Retails for 50.
I only left one picture of each item here for reference. leave your email address here if you want more pictures of specific items. I dont want to clutter up my post with a bunch of pix!
I'm getting so many PM's and its getting hard to reply to on the go
please try to PM me your phone number if you're really interested in anything
I'll PM you mine, and we can work out a time for pickup!
THANKS!
OK, I'm going back to stock and also selling a bunch of stuff that i planned to put on my car.
Reason for selling is that I have to sell my car. I'll get pics up tomorrow when I get access to a camera.
Items are for pick up in Davis CA. Shipping can be arranged at buyer's expense, but most of the items are big and shipping wont be too cheap.
I'm pretty firm on prices as I think what I've listed is very very reasonable.
----Parts already off the car----
1. DMS 50mm Coilovers $2800.
Used just ONE HUNDRED freeway miles after FULL rebuild facilitated by LIC motorsports and PSI @ infineon raceway.
Comes with dyno charts from last week for front and rear. Recommended spring rate: 400lb/in ~ 500lb/in.
Also included are front (v1) and rear (v2) DMS camber plates. Rears are brand new and fronts are used in good condition.
Will throw in some tein springs if you want them...
::Billet ****::
2. Element GT55 Rotated turbo$600
2.5 inch turbo inlet/outlet
Turbo has 600 miles on it in like-new condition
Turbo hotside is coated with jethot coating.
T31 4-bolt, .63 A/R Exhaust Housing.
Turbo should basically perform like a ATP3071 but more power up top thanks to a larger hotside.
2(a). PERRIN v1 rotated uppipe and downpipe. Sold Sold Sold
3. Aeromotive fuel rails (no lines). BNIB Sold Sold Sold
4. Stock STi Fuel Pump Best Offer
5. AEM EMS with AEM ebcs, AEM 3.5 BAR MAP sensor, COBB Map sensor adapter, and AEM IAT Sensor - Sold Sold Sold. Bought used, never installed. COBB adapter is brand new and hard to find.
6. Perrin FMIC core with counterclockwise flow piping $650.
Not the best/smoothest welds on the cold side.
The core was damaged in shipping but re-welded and pressure tested to 80 PSI. Cold side piping tapped for AEM IAT sensor, but can be plugged.
Bought used and never installed.
Tial BOV flange is welded on as well.
Comes with FMIC mount/bumper beam replacement.
7. Advan RCII 17x9.5 +35 in silver 5x114.3 $1100
Test fit one wheel once, and that's it! Tires never mounted to them. Basically brand new.
8. TOP Feed WRX TGV Deletes. Sold Sold Sold
Bought used, never installed.
9. Injector Dynamics ID1000's Sold Sold Sold
BNIB - includes plug-n-play wiring harnesses.
10. WC Lathe Werks Copolymer Teardrop Shift **** - WHITE Sold Sold Sold
11. Killer B Motorsports Delrin Teardrop Shift **** - BLACK Sold Sold Sold
12. Hardened Exhaust Hangers - All Brand New:
4 x Paranoid Fab Green - Sold Sold Sold
2 x Kartboy Black - Sold Sold Sold
----Off the car now, as well----
1. Cobb AP v2 - $Sold Sold Sold
2. Helix Catless DP Sold Sold Sold
Tapped for Wideband O2 Sensor
Painted Black
3. Pioneer AVH-P4100 DVD. Sold Sold Sold
4. JIC Spartan Full Titatium Exhaust. Sold Sold Sold
The 2.5 Inch taper was cut off and a 3 Inch OD slip-in flange is installed for a full 3-inch exhaust that's ridiculously light.
5. Gruppe-S Equal Length Headers. $500
Used for 5500 Miles. I'm the second owner after alcoolaid.
Painted, wrapped, then coated again. Used DEI Titanium wrap and DEI silicone coating.
About $150 in coating alone without labor!
Wrap/Coating is only 1000 miles old.
6. PLX DM-200 with SM-AFR;EGT;BOOST modules. Gone
Willing to give you $50 value for your OEM boost gauge (year doesnt matter, as long as it works)
7. P&L Braided Stainless Steel AVCS Oil Line BNIB, but no box $100
8. Leftover DEI Titanium Exhaust Wrap 2" Sold Sold Sold
Good amount left. Retails for 50.
I only left one picture of each item here for reference. leave your email address here if you want more pictures of specific items. I dont want to clutter up my post with a bunch of pix!
Last edited by sauuce; 09-09-2010 at 09:54 PM.
06-22-2010, 02:35 AM
#4
Registered User
Join Date: Apr 2008
Location: Cupertino CA
Posts: 107
Car Info: 2007 Subaru Sti
How about your headlights. I have a pair of 2007 blacked out. I did them myself. Just decided to go for stock look now. They got moisture when it was constantly raining but clean now for a while. So I'll trade mine for yours and I'll add money on top since I want your stock ones. Pm me lemme know.
06-22-2010, 12:48 PM
#9
How much for the ap and dp? Cut me a deal. Email me at Hondablue13@yahoo.com
06-22-2010, 10:40 PM
#11
Registered User
Thread Starter
iTrader: (5)
Join Date: Nov 2006
Location: Davis CA
Posts: 611
Car Info: prius drivers crazy. ****ing ***wipes...
Yup!
If sybir doesn't pick it up this week it's yours.
How much for the ap and dp? Cut me a deal. Email me at Hondablue13@yahoo.com
yeah I wanted to but it became a hassle and I'd rather have te cash to pick up a subie later...want my brakes for cheap-ish? Shoot me a price - you get first dibs.
06-22-2010, 11:25 PM
#14
Registered User
Join Date: Jul 2009
Location: San Jose, CA
Posts: 428
Car Info: WRX 003
