Magnaflow axleback - $75 - sounds good, pretty loud, also does the snap crackle and pop thing when you let off the gas wrx/sti fitment. 3 inch tip

Stock STi Axleback - $sold

Stock STi midpipe - $sold

Stock Legacy GT Axleback (Right) - $25 - the only reason i have this is because i was going to use the beautiful oval shaped tip it has, but i ended up with a prodrive oval tip .

AEM intake for N/A cars - $Let's make a deal - i painted it flat black, CARB and AEM sticker weren't painted over. has an oil based filter, should probably be re oiled but I'm not sure

couple of N/A airboxes - i dont care

Stock gc8 shift lever and leather boot - $25 - boot is worn. shift lever has these blue things in where it pivots...?

all kinds of clamps/hoses/lines - ask if you need something, i just might have it



** i've been getting a LOT of interest for the magnaflow. here are some pics of it mounted on my car:






________
MERCEDES-BENZ 300D SPECIFICATIONS

 

pm'ed

 

qwerty
________
MAINE MEDICAL MARIJUANA DISPENSARIES

 

ill be up there for the holiday if you still got the mid pipe ill take it

 

pm'ed

 

How far are you from davis? Might want to come up this weekend to check out some of the axlebacks to replace my crappy n1. That is if you still have them :P.

 

i'm a few blocks from sac state
________
FORD TH!NK PICTURE

 

pics of magnaflow alxeback please...

 

yeah pics of every single pipes please. i might grab everything hah!

 

hey guys i dont have a camera but i have some pics of the STi exhaust

the magnaflow looks just like it does in the pictures of it on the car. i merely unbolted it and put on a different exhaust

the legacy GT muffler looks like a muffler with a nice shiny oval shaped tip, i dont have a picture of it.

the STi muffler like said above was messed with a little bit. my friend wanted to do an experiment and i donated my STi muffler for it. we cut the muffler open, sawzalled some of the baffling out and drilled some holes on the internals then took a peice of sheet metal and welded it back together. the sound of the muffler really didnt change much, at all. it still sounds like a stock car. one thing that changed a little bit was the tone, it took on a little bit of an 'exotic' exhaust note. its very quiet though and you have to be outside the car listening to someone rev it to hear it. here are the pics of that little adventure:

you can see the holes drilled:

http://farm2.static.flickr.com/1099/...1a919f.jpg?v=0

sheet metal test fitting, before cut.

http://farm2.static.flickr.com/1302/...da0c87.jpg?v=0

welded back together

http://farm2.static.flickr.com/1181/...edda99.jpg?v=0

painted!

http://farm2.static.flickr.com/1248/...7c459a.jpg?v=0
http://farm2.static.flickr.com/1321/...g?v=1194151849
________
Lamborghini lm004

 

bump

 

Do you have a 2.5RS airbox ? And lastly with the magnaflow bolt onto my 01 2.5RS or do I need to modify something?

 

i have 2 actually i would recommend my AEM intake though, it was a noticeable increase in power but was a bit loud for my tastes. sounds great though!

the magnaflow is actually setup right now to bolt onto a WRX/STi. An exhaust shop could modifiy is very quickly and it woudl probably cost about $20.

I have gotten A LOT of interest in this magnaflow but people are just not coming through to take a look at it. I must be a bad salesman or something...someone get this thing out of my shed! I'm asking $75 for a direct bolt on to your wrx!

 

updated:
________
Cheap Glass Pipes

 

is that 20 mph sign photoshoped in?
just curious being the photoshop nerd i am