NorCal Classifieds Cars, parts, electronics, etc for sale and trade. Private parties and approved regional i-Club Vendors.

FS/FT: 06 OBP WRX part out !

Thread Tools
 
Search this Thread
 
Old Jun 9, 2007 | 11:25 AM
  #1  
Sugo571's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 292
From: San Francisco
Car Info: 2007 WRX (GD7)
Smile FS/FT: 06 OBP WRX part out !

I'm parting out my 2006 OBP WRX. The car only has 3000 miles on it, so all the parts are in mint condition.

HKS Hipermax II coil-over with less then 6000 miles on them, I will trade for 06 and up STI stock complete suspension + $700.00 obo. (NEW PRICE $500.00)

Link > http://www.hksusa.com/products/?id=716

OBP STI trunk with STI stock spoiler in mint condition, I will trade for any OBP wingless trunk (Equal trade)

Front Brembo GT BBK with slotted rotors, the pads have more than 70% meat left, it has less than 10k on it. I will trade for a good condition 06-07 stock complete brake kit (RED SUBARU 4 POT) + $400.00 obo. (NEW PRICE $350.00)

Cusco Front and rear sway bar $110 each (NEW PRICE $100) each

Cusco lower 4pt brace $110 (NEW PRICE $100)

Plz feel free to make any reasonable offers. ~ thx

Last edited by Sugo571; Jun 10, 2007 at 11:57 PM.
Old Jun 9, 2007 | 11:47 AM
  #2  
ucbsti's Avatar
Registered User
iTrader: (9)
 
Joined: May 2005
Posts: 5,011
From: San Jose
Car Info: 2006 evo IX
06 sti suspension wont fit the 06 wrx
Old Jun 9, 2007 | 12:22 PM
  #3  
pwn's Avatar
pwn
Registered User
iTrader: (10)
 
Joined: Mar 2006
Posts: 2,498
From: Dublin, California
Car Info: 09 STi, 10 Cayman S
Are those brembo's after market? Not the stock STi brembo's right? Can you PM me pictures? VERY interested. 06 owner.
Old Jun 9, 2007 | 12:41 PM
  #4  
Sugo571's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 292
From: San Francisco
Car Info: 2007 WRX (GD7)
Originally Posted by ucbsti
06 sti suspension wont fit the 06 wrx
It will ~ Coz thats what my frd is ruuning on now ~ as long as I have the complete suspension (tophat, strut & spring)
Old Jun 9, 2007 | 12:41 PM
  #5  
Sugo571's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 292
From: San Francisco
Car Info: 2007 WRX (GD7)
Originally Posted by pwn
Are those brembo's after market? Not the stock STi brembo's right? Can you PM me pictures? VERY interested. 06 owner.
No picture at this time ~ sry
Old Jun 9, 2007 | 01:06 PM
  #6  
pwn's Avatar
pwn
Registered User
iTrader: (10)
 
Joined: Mar 2006
Posts: 2,498
From: Dublin, California
Car Info: 09 STi, 10 Cayman S
What about the rest of the question..?
Old Jun 9, 2007 | 01:06 PM
  #7  
orwrx's Avatar
Registered User
iTrader: (45)
 
Joined: Jan 2003
Posts: 2,085
From: SF
Car Info: WRC replica
Do you just need the 4pot caliper, pads and rotor to trade with your GT kit? If so, I'm interested!!
Old Jun 9, 2007 | 02:35 PM
  #8  
Sugo571's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 292
From: San Francisco
Car Info: 2007 WRX (GD7)
Originally Posted by orwrx
Do you just need the 4pot caliper, pads and rotor to trade with your GT kit? If so, I'm interested!!
+ $400 and the swap will be done by AHQ (so we will split the labor cost)
Old Jun 9, 2007 | 02:37 PM
  #9  
Sugo571's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 292
From: San Francisco
Car Info: 2007 WRX (GD7)
Originally Posted by pwn
What about the rest of the question..?
Yes, its the Brembo GT BBK not stock STI Brembo but sry I don't have a picture.
Old Jun 9, 2007 | 02:53 PM
  #10  
Sugo571's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 292
From: San Francisco
Car Info: 2007 WRX (GD7)
Part out bump ~
Old Jun 9, 2007 | 03:32 PM
  #11  
pwn's Avatar
pwn
Registered User
iTrader: (10)
 
Joined: Mar 2006
Posts: 2,498
From: Dublin, California
Car Info: 09 STi, 10 Cayman S
When are you looking to get this done? And these won't fit under the stock wrx 2006 rims will they.
Old Jun 9, 2007 | 03:49 PM
  #12  
orwrx's Avatar
Registered User
iTrader: (45)
 
Joined: Jan 2003
Posts: 2,085
From: SF
Car Info: WRC replica
Originally Posted by Sugo571
+ $400 and the swap will be done by AHQ (so we will split the labor cost)
Will it fit under 17" rims tho? If so, it doesn't need to be done by AHQ. I can do it myself in my shop. Will you go lower than that?
Old Jun 9, 2007 | 04:31 PM
  #13  
pwn's Avatar
pwn
Registered User
iTrader: (10)
 
Joined: Mar 2006
Posts: 2,498
From: Dublin, California
Car Info: 09 STi, 10 Cayman S
Are you able to provide any more info about the BBK? Such as...how many pistons are the calipers? How large are the rotors and are they one piece or two piece? What color are the calipers?

Also, you would want the front complete brake assembly from my 06, correct? Thanks!
Old Jun 9, 2007 | 06:06 PM
  #14  
Sugo571's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 292
From: San Francisco
Car Info: 2007 WRX (GD7)
Talking

Originally Posted by pwn
Are you able to provide any more info about the BBK? Such as...how many pistons are the calipers? How large are the rotors and are they one piece or two piece? What color are the calipers?

Also, you would want the front complete brake assembly from my 06, correct? Thanks!
Yes, I do need complete brake assy off ur 06, Its the Brembo GT BBK 4 big pistons in gold color and comes with a one piece slotted rotor, but i forgot the size of the rotor .. ~

I also have a set of Work XT-7 rims with ES100 245/40/17 which will clear the BBK ~ will trade + csh too ~
Old Jun 9, 2007 | 06:09 PM
  #15  
Sugo571's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 292
From: San Francisco
Car Info: 2007 WRX (GD7)
Originally Posted by orwrx
Will it fit under 17" rims tho? If so, it doesn't need to be done by AHQ. I can do it myself in my shop. Will you go lower than that?
Sry ~ I can't lower the price now. It will fit under some 17"



All times are GMT -7. The time now is 08:30 AM.