FS: 2004 20g STi
Thread Starter
Registered User
iTrader: (7)
Joined: Feb 2005
Posts: 398
From: No Show, Mostly Go
Car Info: Black wingless STi/Black 07 A3/Black 07 C230
FS: 2004 20g STi
For Sale 2004 Java Black Pearl STi
51,000 miles
$24,000 obo
These parts have about 10k miles on them
Forced Performance 2.4in 20g
Power Enterprise 850cc injectors
Walbro 255
Turbo XS Top Mount Intercooler
Goodridge Stainless Steel Brakelines
Hawk HPS Brake pads
Gold SSR GT2 17x8.5 ET+48 35k miles but never curbed, include caps and SSR
valve stems and caps.
Falken Azenis RT615 255/40/17 only 5k on them still lots of tread
Cobb Accessport Ver. 1 with orginal box and CD
-GST Motorsports 91 oct map and 91 oct and 50/50 Methanol map
Cobb Catted and wrapped Down Pipe and Cobb Catback
7000 miles on these parts
Exedy Organic Clutch
ACT Streetlite Flywheel
Whiteline Front and Rear Sways
Tein Flex Coilovers
Whiteline Rear Differential Bushing
3000 miles on these parts
SMC Trunk Mounted Methanol Kit
Defi BF Imperial Boost, Oil Pressure, EGT, Pod, Controller
40,000 miles on the Kart Boy Short Shifter and bushings and Whiteline
steering bushings
There are a few bad door dings, needs new front splitters (from scraping),
and I don't have the STi Wing. There is also a dent on the rear right fender
that I was quoted on being about 1000 to fix. The rear bumper cover has
been bumped into a few times (bad Berkeley drivers). Other than the cosmetic
stuff it is a great strong street car, and would make a great track car.
It however has never been tracked or taken to a drag strip. It's on a
conservative tune by Mike at GST Motorsports. It put down 299 whp/344 wtq
on 50/50 Methanol on GST's Mustang dyno. They did a leakdown and
compression test before the SMC was installed just to make sure and it passed
with no problems. Mobil 1 synthetic every 3000 miles. I should have paper
work for all or most services and work done.
I know I should part out the car, but my wife is pregnant and I need a family car.
I've put it off too long. If I can get close enough to what I am asking then
I'll sell it as is. If not I'll have to part it out.
Detailed pics coming soon, or you are welcome to come take a look and check it out in person.
Thanks
David
51,000 miles
$24,000 obo
These parts have about 10k miles on them
Forced Performance 2.4in 20g
Power Enterprise 850cc injectors
Walbro 255
Turbo XS Top Mount Intercooler
Goodridge Stainless Steel Brakelines
Hawk HPS Brake pads
Gold SSR GT2 17x8.5 ET+48 35k miles but never curbed, include caps and SSR
valve stems and caps.
Falken Azenis RT615 255/40/17 only 5k on them still lots of tread
Cobb Accessport Ver. 1 with orginal box and CD
-GST Motorsports 91 oct map and 91 oct and 50/50 Methanol map
Cobb Catted and wrapped Down Pipe and Cobb Catback
7000 miles on these parts
Exedy Organic Clutch
ACT Streetlite Flywheel
Whiteline Front and Rear Sways
Tein Flex Coilovers
Whiteline Rear Differential Bushing
3000 miles on these parts
SMC Trunk Mounted Methanol Kit
Defi BF Imperial Boost, Oil Pressure, EGT, Pod, Controller
40,000 miles on the Kart Boy Short Shifter and bushings and Whiteline
steering bushings
There are a few bad door dings, needs new front splitters (from scraping),
and I don't have the STi Wing. There is also a dent on the rear right fender
that I was quoted on being about 1000 to fix. The rear bumper cover has
been bumped into a few times (bad Berkeley drivers). Other than the cosmetic
stuff it is a great strong street car, and would make a great track car.
It however has never been tracked or taken to a drag strip. It's on a
conservative tune by Mike at GST Motorsports. It put down 299 whp/344 wtq
on 50/50 Methanol on GST's Mustang dyno. They did a leakdown and
compression test before the SMC was installed just to make sure and it passed
with no problems. Mobil 1 synthetic every 3000 miles. I should have paper
work for all or most services and work done.
I know I should part out the car, but my wife is pregnant and I need a family car.
I've put it off too long. If I can get close enough to what I am asking then
I'll sell it as is. If not I'll have to part it out.
Detailed pics coming soon, or you are welcome to come take a look and check it out in person.
Thanks
David
Last edited by Forced; Apr 27, 2007 at 01:50 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Eddie at PNR
Used Aftermarket Car Parts For Sale
2
Oct 16, 2013 12:56 AM
CreoWRX
Used Aftermarket Car Parts For Sale
13
Jun 5, 2007 10:56 PM
I-Speed USA
Engine/Power - EJ20T (pre-2006 WRX and JDM)
10
Dec 28, 2003 09:14 PM



