FS : 17x8 Rota Torque, Silver, 5x100, set of 4
Thread Starter
Registered User
iTrader: (21)
Joined: Nov 2002
Posts: 1,253
From: Santa Clara CA USA
Car Info: 96 Chevy Impala SS, 06 GMC 2500HD (former 02 WRX)
FS : 17x8 Rota Torque, Silver, 5x100, set of 4
For Sale : used set of Rota Torques, 5x100 bolt pattern, silver, 17x8". These DO clear the STI Brembos, and will fit on pretty much every 5-lug Subaru except for an 05+ STI
The wheels are in pretty good shape, not perfect (say, 8 out of 10). No curbage, no bends, minor paint chips in spots from R&R from the car (I used them as autocross wheels, thus were R&R'ed quite a bit). They are "ok" on cleanliness on the outside, could use being washed though
They include some tires on them (Hankook RS2, 235/40R17, at the wear bars and with camber wear on them), but, ummm, well I am not gonna guarantee anything on the tires other than they are round and hold air
. These rims basically should be taken to a tire shop and have new rubber put on them pretty soon.
In consideration of shape (fairly good, could use cleaning) and tires (umm, there and that's about it!), they are priced at $450 OBO. I am located in Santa Clara, can meet you in the evening anywhere within 50 miles or so from here if need be.
Cash talks
PM me if interested!
Pics attached
The wheels are in pretty good shape, not perfect (say, 8 out of 10). No curbage, no bends, minor paint chips in spots from R&R from the car (I used them as autocross wheels, thus were R&R'ed quite a bit). They are "ok" on cleanliness on the outside, could use being washed though
They include some tires on them (Hankook RS2, 235/40R17, at the wear bars and with camber wear on them), but, ummm, well I am not gonna guarantee anything on the tires other than they are round and hold air
. These rims basically should be taken to a tire shop and have new rubber put on them pretty soon. In consideration of shape (fairly good, could use cleaning) and tires (umm, there and that's about it!), they are priced at $450 OBO. I am located in Santa Clara, can meet you in the evening anywhere within 50 miles or so from here if need be.
Cash talks
PM me if interested!
Pics attached
Thread Starter
Registered User
iTrader: (21)
Joined: Nov 2002
Posts: 1,253
From: Santa Clara CA USA
Car Info: 96 Chevy Impala SS, 06 GMC 2500HD (former 02 WRX)
Yes, they'll fit any year WRX. Note that you might need to roll your rear fenderlips for clearance on a wagon (I did), but I doubt it'd be an issue on a sedan.
Also, forgot to mention that you MIGHT need tuner lugnuts (or at the very least, a thin wall socket on OEM lugnuts) for these wheels. I no longer have any OEM lugnuts, so I can't check and tell you for sure. I have an old set of splinedrive lugnuts with key....unfortunately only 19 of the lugnuts (one got cross-threaded and munched up on a bad lug). I'll throw them in with the wheels and you can get extras on the lugnuts from Subydude for $2.25 each.
Also, forgot to mention that you MIGHT need tuner lugnuts (or at the very least, a thin wall socket on OEM lugnuts) for these wheels. I no longer have any OEM lugnuts, so I can't check and tell you for sure. I have an old set of splinedrive lugnuts with key....unfortunately only 19 of the lugnuts (one got cross-threaded and munched up on a bad lug). I'll throw them in with the wheels and you can get extras on the lugnuts from Subydude for $2.25 each.
Thread Starter
Registered User
iTrader: (21)
Joined: Nov 2002
Posts: 1,253
From: Santa Clara CA USA
Car Info: 96 Chevy Impala SS, 06 GMC 2500HD (former 02 WRX)
Call Subydude to be sure, but if I recall correctly about 18 lbs. Not bad for a cast 17x8". I know at the time I got them it was the lightest Rota that would clear the Brembos AND was 17x8" (autocross class I ran in limited to 8.0" wide wheels).
Thread Starter
Registered User
iTrader: (21)
Joined: Nov 2002
Posts: 1,253
From: Santa Clara CA USA
Car Info: 96 Chevy Impala SS, 06 GMC 2500HD (former 02 WRX)
Originally Posted by Legacy
$450 shipped to 13669
Chicks dig me. April Fool's!
iTrader: (31)
Joined: Apr 2006
Posts: 10,989
From: Fremont, CA
Car Info: 1997 Impreza, 2014 BRZ
Originally Posted by Impala SS AutoX
Call Subydude to be sure, but if I recall correctly about 18 lbs. Not bad for a cast 17x8". I know at the time I got them it was the lightest Rota that would clear the Brembos AND was 17x8" (autocross class I ran in limited to 8.0" wide wheels).
i want ur rotas!
hey impala i would like to buy ur rims tonight. i live in alameda and will meet you half way....say...will 245s fit the rims? Also ihave stoptech bbkit...will they fit?If so, call me at 510-206-6185. thanks code3
Last edited by code3scooby; Feb 5, 2007 at 12:39 PM. Reason: i forgot my bb kit.
Registered User
iTrader: (15)
Joined: Aug 2005
Posts: 12,522
From: Salinas, CA
Car Info: 1997 Acura Integra GS Sedan
Originally Posted by Impala SS AutoX
No can do....ran it thru FedEx online, and the CHEAPEST shipping option for that far was almost $200 for the set of 4
Registered User
Joined: Feb 2007
Posts: 11
From: Ottawa
Car Info: 05 Forester XT
Originally Posted by Impala SS AutoX
No can do....ran it thru FedEx online, and the CHEAPEST shipping option for that far was almost $200 for the set of 4
I just came back with $94 from UPS for ground service with 80lbs weight.
Originally Posted by SubyN00by
I work for FedEx and can do an i-club hookup, you'd have to drive a little though, PM me if interested...
That would be sweet if you could hook us up !