ForSale: Manifold, CAI, FuelRails, CatchCan, BoostController, Hoses, Clamps, and more
08-15-2012, 03:44 AM
#1
Registered User
Thread Starter
iTrader: (10)
Join Date: Jun 2004
Location: California Love
Posts: 1,405
Car Info: Big Thanks Jeremy@CrucialRacing and Ed@EQ-Tuning
ForSale: Manifold, CAI, FuelRails, CatchCan, BoostController, Hoses, Clamps, and more
check this out
i would like to sell this whole thing as a package
as many of you know, doing a hard pipe inlet is quite hard, since it requires lots of modification, cutting fuel rails, relocating fuel pressure regulator, modifying hoses and etc.. and when doing this route, you might as well go all out and do aftermarket Fuel Rails, Catch Can and etc. That is the main reason why i would like to sell this everything you see on the picture together,because every parts you see on the picture are modified to work with each other
im including the complete Stock STi manifold with it, for easy an drop in install, and also just incase you decide to back to stock, since doing hard pipe inlet requires no going back modification on the stock intake manifold. Im also willing to install everything with the buyers help, i have done this APS inlet install on 6 different cars, most shop wont even bother doing this hard pipe install
with this package you can easily go back to stock
its perfect for stock location turbo,
tsorry no pictures when it was installed, but you can see it on the video, people that seen my car inperson can vouch how nice and clean the installs were with all this mods
fast forward to :44 seconds for the engine bay clip
i would like to get $800 for everything, with the install
just the aftermarket parts alone brand new would total $1640, not including the complete Stock intake manifold and TGVs
ill cut my loses, just to see another badass stock turbo STi kick some ***,
Thanks for looking,
PM me your number if your interested or have any Questions,
- Complete Stock STi intake manifold, ( stock TGV, Wire harness, Throttle body, ect )
- Perrin Side Feed Fuel Rail kit V2 ($500 new)
- APS Inlet kit ($290 new)
- APS Cold Air Intake ($250 new)
- Samco TMIC Hose Kit ($120 new)
- Eq-Tuning baffled Catch Can ($299 new)
- Grimmspeed 8mm Phenolic Spacers kit ($80 new)
- Hallman RX boost controller ($100 new)
- Stock STi Bypass valve Modified to handle more boost
- Stock STi intercooler Y-pipe
- Throttle body T-bolt Clamps
- Many Bolts, Clips and Clamps ( non shown on the picture )
i would like to sell this whole thing as a package
as many of you know, doing a hard pipe inlet is quite hard, since it requires lots of modification, cutting fuel rails, relocating fuel pressure regulator, modifying hoses and etc.. and when doing this route, you might as well go all out and do aftermarket Fuel Rails, Catch Can and etc. That is the main reason why i would like to sell this everything you see on the picture together,because every parts you see on the picture are modified to work with each other
im including the complete Stock STi manifold with it, for easy an drop in install, and also just incase you decide to back to stock, since doing hard pipe inlet requires no going back modification on the stock intake manifold. Im also willing to install everything with the buyers help, i have done this APS inlet install on 6 different cars, most shop wont even bother doing this hard pipe install
with this package you can easily go back to stock
its perfect for stock location turbo,
tsorry no pictures when it was installed, but you can see it on the video, people that seen my car inperson can vouch how nice and clean the installs were with all this mods
fast forward to :44 seconds for the engine bay clip
i would like to get $800 for everything, with the install
just the aftermarket parts alone brand new would total $1640, not including the complete Stock intake manifold and TGVs
ill cut my loses, just to see another badass stock turbo STi kick some ***,
Thanks for looking,
PM me your number if your interested or have any Questions,
- Complete Stock STi intake manifold, ( stock TGV, Wire harness, Throttle body, ect )
- Perrin Side Feed Fuel Rail kit V2 ($500 new)
- APS Inlet kit ($290 new)
- APS Cold Air Intake ($250 new)
- Samco TMIC Hose Kit ($120 new)
- Eq-Tuning baffled Catch Can ($299 new)
- Grimmspeed 8mm Phenolic Spacers kit ($80 new)
- Hallman RX boost controller ($100 new)
- Stock STi Bypass valve Modified to handle more boost
- Stock STi intercooler Y-pipe
- Throttle body T-bolt Clamps
- Many Bolts, Clips and Clamps ( non shown on the picture )
Last edited by downsti; 08-15-2012 at 05:04 AM.
08-15-2012, 02:38 PM
#4
Registered User
Thread Starter
iTrader: (10)
Join Date: Jun 2004
Location: California Love
Posts: 1,405
Car Info: Big Thanks Jeremy@CrucialRacing and Ed@EQ-Tuning
thanks man, not just WRX but for STi also
and yup its a proven combo, the parallel fuel rails for less chance of leaning out the cylinder due to poor design on the stock fuel rails, APS inlet to increase flow, reduce restriction, and safety for collapsing and cutting, APS CAI the best made intake, Hallman MBC ultra responsive boost, Eq-tuning Catch can, great for safe and relive crank case pressure, you know the drill haha
this combo was put together to make power, and safety
Last edited by downsti; 08-15-2012 at 02:41 PM.
08-20-2012, 03:55 AM
#10
Registered User
iTrader: (12)
Join Date: Feb 2007
Location: milpitas ca
Posts: 856
Car Info: 06 wrb sti
This was the set up that spank the GTR before it had 850hp lol.
You forgot to mention your parts are low mileage as well dude.
bump for you!!!! Time to party after you sell this btw haha
You forgot to mention your parts are low mileage as well dude.
bump for you!!!! Time to party after you sell this btw haha
08-21-2012, 10:48 AM
#11
Registered User
Thread Starter
iTrader: (10)
Join Date: Jun 2004
Location: California Love
Posts: 1,405
Car Info: Big Thanks Jeremy@CrucialRacing and Ed@EQ-Tuning
yup thats the set up that did it lol and yup its low miles about 7k miles
and thanks mike, party for sure hahahaha