NorCal Classifieds Cars, parts, electronics, etc for sale and trade. Private parties and approved regional i-Club Vendors.

ecuTEK reflash and Vishnu XEDE Ecu

Thread Tools
 
Search this Thread
 
Old Jan 6, 2006 | 04:53 PM
  #1  
suby_dude's Avatar
Thread Starter
Former Sponsor
iTrader: (18)
 
Joined: Nov 2002
Posts: 4,331
From: BAIC Wagon/Sedan Clique
Car Info: a few WRX's and a Z ;)
ecuTEK reflash and Vishnu XEDE Ecu

For sale is an ecutek reflashed ecu off my 03 wrx. was reflashed by vishnu with different dead time for PE injectors and also timing since I was running a big maf with the car. I'm not sure if you can drive the car on just this ecu so for anyone interested I will meet you at Vishnu, Gruppe-s, or any other ecutek tuner in the bay area before your tune so you can get it reflashed on the spot and then get tuned.

Asking $300 + trade of stock 02/03 MT ecu.

Vishnu XEDE piggyback. This is a great piggyback ecu. Had it on my car alone back when I just had turboback exhaust, it was awesome and added great power/made the car drive better. With the vf30 setup it was just as nice, drove better than stock and made great power. This XEDE has the newest harness for the wrx.

Asking $SOLD

Items are located in Danville but I work in Fremont. Can also meet up if it's within a reasonable distance. Also as mentioned with the ecutek I will meet at gruppe-s, vishnu, or any ecutek tuner in the bay area to swap.

PM me on this account or msg me on aim at dan avoN7.

-Dan

Last edited by suby_dude; Jan 11, 2006 at 06:42 PM.
Old Jan 7, 2006 | 12:14 AM
  #2  
omygata's Avatar
Registered User
iTrader: (20)
 
Joined: Mar 2005
Posts: 2,004
From: Sacramento, mackin' on ho's
Car Info: The ladies wild
do you need to take the piggy back system in to a tuning shop, or is it set for a near stock setup? i ask because i would start off using it with oem injectors, turbo, etc.
Old Jan 7, 2006 | 10:06 AM
  #3  
Zoeb2s's Avatar
I <3 White Girls
iTrader: (38)
 
Joined: Nov 2002
Posts: 26,491
From: Danville, CA
Car Info: E92 M3, E70, F32, E21
Originally Posted by omygata
do you need to take the piggy back system in to a tuning shop, or is it set for a near stock setup? i ask because i would start off using it with oem injectors, turbo, etc.
the Xede is a piggyback so u don't have to get it tuned right away.

You can easily load a base map for your mods and start using it right away without having to pay someone to tune it right away.

Of course, ideally you should get it tuned for optimum performance, but again, it's not needed right away.
Old Jan 7, 2006 | 03:19 PM
  #4  
suby_dude's Avatar
Thread Starter
Former Sponsor
iTrader: (18)
 
Joined: Nov 2002
Posts: 4,331
From: BAIC Wagon/Sedan Clique
Car Info: a few WRX's and a Z ;)
Originally Posted by omygata
do you need to take the piggy back system in to a tuning shop, or is it set for a near stock setup? i ask because i would start off using it with oem injectors, turbo, etc.
As Zoeb mentioned you will not need to get this engine management tuned right now to run it. Vishnu offers a great base map for the stock wrx that will work very well. I can load the map on the ecu for you if you would like even incase you don't have a laptop for the xede.

-Dan
Old Jan 8, 2006 | 12:45 PM
  #5  
UK n00b's Avatar
VIP Member
iTrader: (3)
 
Joined: Aug 2003
Posts: 2,539
From: Farnborough, Hants
Car Info: the blue bucket
What are you going to run now Dan?

Bump for you anyway!

Mike
Old Jan 8, 2006 | 03:54 PM
  #6  
suby_dude's Avatar
Thread Starter
Former Sponsor
iTrader: (18)
 
Joined: Nov 2002
Posts: 4,331
From: BAIC Wagon/Sedan Clique
Car Info: a few WRX's and a Z ;)
Originally Posted by UK n00b
What are you going to run now Dan?

Bump for you anyway!

Mike
going with the hydra ems. thanks for the bump

-Dan
Old Jan 10, 2006 | 12:07 AM
  #7  
suby_dude's Avatar
Thread Starter
Former Sponsor
iTrader: (18)
 
Joined: Nov 2002
Posts: 4,331
From: BAIC Wagon/Sedan Clique
Car Info: a few WRX's and a Z ;)
ecutek pending sale.

xede still up for sale.

-Dan
Old Jan 11, 2006 | 06:41 PM
  #8  
suby_dude's Avatar
Thread Starter
Former Sponsor
iTrader: (18)
 
Joined: Nov 2002
Posts: 4,331
From: BAIC Wagon/Sedan Clique
Car Info: a few WRX's and a Z ;)
Xede is sold. Ecutek still available.

pic of the ecu



-Dan
Old Jan 11, 2006 | 10:07 PM
  #9  
Rad One's Avatar
Registered User
iTrader: (4)
 
Joined: Apr 2004
Posts: 722
From: Bay Area
Car Info: 2001 Sedona Red OBS / 2016 FXT Touring
does that mean its $300 for the ecutek (plus our stock exhaust) AND we get it tuned by Vishnu or Gruppe S?
Old Jan 11, 2006 | 11:31 PM
  #10  
dan avoN7's Avatar
2006 Mt Hammy Car Show Winner
iTrader: (11)
 
Joined: Dec 2002
Posts: 2,730
From: Danville, CA
Car Info: Black 03 WRX, White 04 E46 M3
Originally Posted by Rad One
does that mean its $300 for the ecutek (plus our stock exhaust) AND we get it tuned by Vishnu or Gruppe S?
the price is $300 for my ecu w/ a ecutek license and the buyer will have to give me their stock ecu from a 02/03 wrx with a manual transmission. No trading of the exhaust.... It is your decision where you want to get tuned, but you will have to pay for the dyno tune (roughly $175-200 at most shops) So instead of going to a shop and paying $650 for the license + another $200 for tuning, you get the license for $300 and then pay for the tune. So you are for the most part saving $350 if you want to go the dyno tuned rought.
Old Jan 13, 2006 | 01:13 PM
  #11  
dan avoN7's Avatar
2006 Mt Hammy Car Show Winner
iTrader: (11)
 
Joined: Dec 2002
Posts: 2,730
From: Danville, CA
Car Info: Black 03 WRX, White 04 E46 M3
bump.
Old Jan 15, 2006 | 10:16 PM
  #12  
suby_dude's Avatar
Thread Starter
Former Sponsor
iTrader: (18)
 
Joined: Nov 2002
Posts: 4,331
From: BAIC Wagon/Sedan Clique
Car Info: a few WRX's and a Z ;)
to the top again
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
blue05wrx
Engine/Power - EJ20T (pre-2006 WRX and JDM)
3
Mar 9, 2006 04:54 PM
joltdudeuc
NorCal Classifieds
8
Feb 26, 2005 05:44 PM
JT-STI
Engine Management
2
Nov 3, 2004 12:10 AM
MonkeyAB
Engine Management
5
Mar 23, 2003 08:57 AM
CupertinoSteve
Engine/Power - EJ20T (pre-2006 WRX and JDM)
19
Jan 29, 2003 11:05 PM




All times are GMT -7. The time now is 11:56 PM.