Cusco 22mm Rear Sway Bar & Helix Rear Endlink Install Combo ! - 02+ WRX
Cusco 22mm Rear Sway Bar & Helix Rear Endlink Install Combo ! - 02+ WRX
Does your car not take the turns strong enough. Do you feel like the back end of the car is just a huge trailer not coming around. Then you need to get a rear sway bar to improve your handling. A Cusco rear sway bar will push the car through the turns similar to a rear wheel drive car.
The addition of Helix Solid Endlinks significantly increases cornering response and tightness, regardless of the use of an aftermarket sway bar or not. The use of spherical bearings allows for a much wider range of angular movement and eliminates the squeaking and creaking associated with the deterioration of rubber or urethane bushings. The spherical bearings are teflon coated to prevent dirt and debris from fouling movement.
Cusco 22mm Rear Sway Bar (3-way Adjustable) & Helix Rear Endlink Install Combo ! - 02+ WRX
$265 OTD and installed (includes tax)


Please call us to setup an appointment.
Thanks,
Preston
510-783-5300
preston@gruppe-s.com
The addition of Helix Solid Endlinks significantly increases cornering response and tightness, regardless of the use of an aftermarket sway bar or not. The use of spherical bearings allows for a much wider range of angular movement and eliminates the squeaking and creaking associated with the deterioration of rubber or urethane bushings. The spherical bearings are teflon coated to prevent dirt and debris from fouling movement.
Cusco 22mm Rear Sway Bar (3-way Adjustable) & Helix Rear Endlink Install Combo ! - 02+ WRX
$265 OTD and installed (includes tax)


Please call us to setup an appointment.
Thanks,
Preston
510-783-5300
preston@gruppe-s.com
Last edited by gruppe-s; Oct 6, 2005 at 08:54 PM.
Originally Posted by gruppe-s
This price is for the 3-way Adjustable bar
I updated the 1st post.
Pickup price for the Cusco bar is $157.68 OTD (includes tax)
Regards,
Preston
I updated the 1st post.Pickup price for the Cusco bar is $157.68 OTD (includes tax)
Regards,
Preston
also, fitment says +02 WRX...wagon also?...cus that means it will fit GF chassis too.
Registered User
iTrader: (1)
Joined: May 2005
Posts: 1,404
From: My lugnuts require more torque then your Honda makes
Car Info: 05 WRX
Originally Posted by gruppe-s
This price is for the 3-way Adjustable bar
I updated the 1st post.
Pickup price for the Cusco bar is $157.68 OTD (includes tax)
Regards,
Preston
I updated the 1st post.Pickup price for the Cusco bar is $157.68 OTD (includes tax)
Regards,
Preston
Actually I wanted the OTD price of REAR (adjust) with the Helix Endlinks

Also the price for Front, Rear(adjust) and Helix Endlinks

Might pick up a set after the dent meet
thanks!
Last edited by gqchynaboy; Oct 7, 2005 at 08:51 AM.
Originally Posted by N600
that doesn't include the endlinks for that $157 pick-up price does it?
also, fitment says +02 WRX...wagon also?...cus that means it will fit GF chassis too.
also, fitment says +02 WRX...wagon also?...cus that means it will fit GF chassis too.

Thanks,
Preston
Originally Posted by gqchynaboy
Actually I wanted the OTD price of REAR (adjust) with the Helix Endlinks 
Also the price for Front, Rear(adjust) and Helix Endlinks

Also the price for Front, Rear(adjust) and Helix Endlinks

We're sold out of Cusco front WRX sway bars. Next shipment is 4-6 wks away.
Regards,
Preston
Registered User
iTrader: (1)
Joined: May 2005
Posts: 1,404
From: My lugnuts require more torque then your Honda makes
Car Info: 05 WRX
Originally Posted by gruppe-s
Sure: OTD for Cusco rear sway & Helix rear endlinks is $240 picked up
We're sold out of Cusco front WRX sway bars. Next shipment is 4-6 wks away.
Regards,
Preston
We're sold out of Cusco front WRX sway bars. Next shipment is 4-6 wks away.
Regards,
Preston
You can't sell it at this price still for $219 OTD? If so, I would like to pick it up tommarow

https://www.i-club.com/forums/showth...ght=cusco+sway
Last edited by gqchynaboy; Oct 7, 2005 at 01:47 PM.
Originally Posted by gqchynaboy
You can't sell it at this price still for $219 OTD? If so, I would like to pick it up tommarow 
https://www.i-club.com/forums/showth...ght=cusco+sway

https://www.i-club.com/forums/showth...ght=cusco+sway

Thanks,
Preston
Registered User
iTrader: (1)
Joined: May 2005
Posts: 1,404
From: My lugnuts require more torque then your Honda makes
Car Info: 05 WRX
Originally Posted by gruppe-s
Sure, I can honor that price. 
Thanks,
Preston

Thanks,
Preston
What time do you guys close tommarow?
Website says only (M-F 10-6 PST)
Thread
Thread Starter
Forum
Replies
Last Post
edzwrx
NorCal Classifieds
0
Jul 20, 2012 11:52 PM
sabrebluewhale
Suspension, Handling, and Brakes
1
Jul 7, 2008 04:23 PM
emosubaru
Suspension, Handling, and Brakes
2
Sep 5, 2004 06:49 PM




