BRULLEN Equal Length Headers, High Flow cat and custom resonated midpipe for RS
04-02-2006, 10:51 PM
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Nov 2002
Location: Folsom, CA
Posts: 639
Car Info: 98RS - Pretty Blue
BRULLEN Equal Length Headers, High Flow cat and custom resonated midpipe for RS
I'm going back to stock so I can have my car smogged and decided to sell my Brullen exhaust setup. This came off of my 98 RS so it will fit 98-01 and possibly others? Not sure exactly, but I'll post back if I find out.
The entire setup includes Brullen Equal Length headers, a stainless steel Brullen High Flow Cat, and a custom 2.25" midpipe with a Magnaflow high flow round resonator that connects to the stock muffler location - so you can just bolt on whatever muffler you want without having to do any cutting or welding (this is very good).
The Brullen headers and cat are made by IonPerformance, who no longer manufactures these parts for subarus. The equal length Brullen design delivers a nice power increase and a strong smooth pull throughout the RPM range. There has been a lot of good information posted about these headers so please feel free to search around.
The Magnaflow round resonator in the midpipe is a design that doesn't restrict airflow at all, yet brings the sound down to a perfect level.
The header cat sold new for over $1100. The midpipe cost $160 to have made with the resonator. Also included are spring bolts to connect the cat and midpipe as well as a (used) gasket for the cat to header, since it has an nice large opening
Feel free to PM me with any questions, or if you're interested in buying. Locals will take priority, but I'm willing to ship.
$600 plus shipping
Pics
high flow cat
header. the silverish stuff is high temp paint that melted off.
brullen badge on the cat
high flow cat
cat flange that connects to header
header flange 1
header flange 2
headers again
header, midpipe and cat
The entire setup includes Brullen Equal Length headers, a stainless steel Brullen High Flow Cat, and a custom 2.25" midpipe with a Magnaflow high flow round resonator that connects to the stock muffler location - so you can just bolt on whatever muffler you want without having to do any cutting or welding (this is very good).
The Brullen headers and cat are made by IonPerformance, who no longer manufactures these parts for subarus. The equal length Brullen design delivers a nice power increase and a strong smooth pull throughout the RPM range. There has been a lot of good information posted about these headers so please feel free to search around.
The Magnaflow round resonator in the midpipe is a design that doesn't restrict airflow at all, yet brings the sound down to a perfect level.
The header cat sold new for over $1100. The midpipe cost $160 to have made with the resonator. Also included are spring bolts to connect the cat and midpipe as well as a (used) gasket for the cat to header, since it has an nice large opening
Feel free to PM me with any questions, or if you're interested in buying. Locals will take priority, but I'm willing to ship.
$600 plus shipping
Pics
high flow cat
header. the silverish stuff is high temp paint that melted off.
brullen badge on the cat
high flow cat
cat flange that connects to header
header flange 1
header flange 2
headers again
header, midpipe and cat
Last edited by ilmaestro; 04-23-2006 at 07:14 PM.
04-15-2006, 07:24 PM
#4
Registered User
Thread Starter
iTrader: (1)
Join Date: Nov 2002
Location: Folsom, CA
Posts: 639
Car Info: 98RS - Pretty Blue
Some 1/4 times:
http://forums.nasioc.com/forums/show...ders+stainless
"Times were taken on the same stretch of the highway at 12:00 (midnight about over a span of 3 weeks) A total of 27 runs were taken, 9 stock runs, 9 cat back runs, and 9 Header w/ cat back runs. Each section will show the averages. The other mods which were prestent during all the runs are K&N Filter, Cold air tube to the fender, and Under Drive Pulley. "
Before Catback or Headers:
0-60 = 8.1 Sec (average of 3 runs)
1/4 Mile = 16.14 @ 86 (Best of 3 runs)
HP = 115 (average of 3 runs)
Brullen 2.25" Cat Back exhaust before Headers:
0 - 60 = 7.4 (average of 3 runs)
1/4 Mile = 15.39 @ 90 (Best of 3 runs)
HP = 121 (average of 3 runs)
Header + 2.25 Cat Back exhaust:
0 - 60 = 6.91 (average of 3 runs)
1/4 Mile = 14.94 @ 92 (Best of 3 runs)
HP = 136 (average of 3 runs)
http://forums.nasioc.com/forums/show...ders+stainless
"Times were taken on the same stretch of the highway at 12:00 (midnight about over a span of 3 weeks) A total of 27 runs were taken, 9 stock runs, 9 cat back runs, and 9 Header w/ cat back runs. Each section will show the averages. The other mods which were prestent during all the runs are K&N Filter, Cold air tube to the fender, and Under Drive Pulley. "
Before Catback or Headers:
0-60 = 8.1 Sec (average of 3 runs)
1/4 Mile = 16.14 @ 86 (Best of 3 runs)
HP = 115 (average of 3 runs)
Brullen 2.25" Cat Back exhaust before Headers:
0 - 60 = 7.4 (average of 3 runs)
1/4 Mile = 15.39 @ 90 (Best of 3 runs)
HP = 121 (average of 3 runs)
Header + 2.25 Cat Back exhaust:
0 - 60 = 6.91 (average of 3 runs)
1/4 Mile = 14.94 @ 92 (Best of 3 runs)
HP = 136 (average of 3 runs)
Thread
Thread Starter
Forum
Replies
Last Post
oyrocker47@hotm
Engine/Power - non turbo (All non turbo Imprezas)
8
02-01-2007 01:01 PM
ilmaestro
Used Aftermarket Car Parts For Sale
6
04-29-2006 05:43 PM
DNTOUCH
Used Aftermarket Car Parts For Sale
0
03-13-2006 05:11 PM
dRu888
For Sale by Members
0
12-27-2003 05:29 PM
