08+ WRX garage sale! Stage 3 part out!
02-11-2011, 06:06 PM
#1
Registered User
Thread Starter
iTrader: (7)
Join Date: Mar 2009
Location: Bay Area, CA
Posts: 860
Car Info: 2010 997.2 GT3
08+ WRX garage sale! Stage 3 part out!
And we are back on! All prices are firm, I need the money and every penny of it! I can give a discount if you buy multiple parts but don't expect a huge savings off.
I need to sell a lot of stuff. I am trading in for a 2011 WRX limited or a 2011 STi. So I may be in the market for a stock wingless or winged 08-10 WRB trunk!
Again I am out of state for college so I won't be home until the 11th of March to take more stuff off my car.
Stuff that is on my car that needs to go (feel free to PM me if you are interested so I can gauge interest and I can send you pricing as well. But you will have to wait for me to get home so I can remove this stuff to then meet up or pick up)
Updated 4/29 (** denotes not off the car)
**Invidia N1 Regular Street (Resonated) CBE Sedan Single Exit -$350
**ERZ Catted DP-$250
**WRB Splash guards-$50
**GTSpec EL Headers w/ 3 bolt up pipe-offer
Perrin EBCS (*missing the screw in port but it can be bought at a hardware shop for cheap)-offer
So check back for updates!
So first I have
5x100 Rota G-Forces 18x9 +35 no tires
-They now just sit in my garage. There is some curb rash on them but the previous owner sanded them and touched them up.
-No bends and No cracks
-They clear Brembos and my Stoptechs fine.
-Two are in good condition the other two have a bit of rash
Price: $600
Blouch Dom 3xtr
-This is a brand new 3xtr covered from warranty (my last one cracked on the hotside so warranty replaced it with a new one and hasn't gone back on yet)
-Obviously no shaft play or anything of the sort
Price: SOLD
TurboXS Front Mount Intercooler
-Still like new, has seen about 6k miles
-It should fit LGTs? It will fit WRX's and STi's 08-10. I have the extra piping for STi's. It will possibly fit '11s?
-You can keep stock fogs and you don't need to get a smaller battery. Just trim the bumper and bend a metal clip and you are good to go.
Price:$700
AVO Wastegate Actuator 15PSI for TD04s
Price: $100
Black Perrin BOV VTA
Price:SOLD
Black Perrin Cold Air Intake
Price: $150
09+/STi Grill black painted brow and also PILLAR-LESS! (Yes I cut out the ugly pillar and there are no drawbacks just a cleaner look!)
Price:SOLD
Red Urethane RA Mudflaps
Price: PENDING
Black Urethane RA Mudflaps (not pictured)
Price: $100
BC BR Coilovers-$700
Price: SOLD
Harman Motive Up Pipe V-Band 44mm Red Tial (.9 Bar) EWG w/ dump tube
Price: SOLD
I need to sell a lot of stuff. I am trading in for a 2011 WRX limited or a 2011 STi. So I may be in the market for a stock wingless or winged 08-10 WRB trunk!
Again I am out of state for college so I won't be home until the 11th of March to take more stuff off my car.
Stuff that is on my car that needs to go (feel free to PM me if you are interested so I can gauge interest and I can send you pricing as well. But you will have to wait for me to get home so I can remove this stuff to then meet up or pick up)
Updated 4/29 (** denotes not off the car)
**Invidia N1 Regular Street (Resonated) CBE Sedan Single Exit -$350
**ERZ Catted DP-$250
**WRB Splash guards-$50
**GTSpec EL Headers w/ 3 bolt up pipe-offer
Perrin EBCS (*missing the screw in port but it can be bought at a hardware shop for cheap)-offer
So check back for updates!
So first I have
5x100 Rota G-Forces 18x9 +35 no tires
-They now just sit in my garage. There is some curb rash on them but the previous owner sanded them and touched them up.
-No bends and No cracks
-They clear Brembos and my Stoptechs fine.
-Two are in good condition the other two have a bit of rash
Price: $600
Blouch Dom 3xtr
-This is a brand new 3xtr covered from warranty (my last one cracked on the hotside so warranty replaced it with a new one and hasn't gone back on yet)
-Obviously no shaft play or anything of the sort
Price: SOLD
TurboXS Front Mount Intercooler
-Still like new, has seen about 6k miles
-It should fit LGTs? It will fit WRX's and STi's 08-10. I have the extra piping for STi's. It will possibly fit '11s?
-You can keep stock fogs and you don't need to get a smaller battery. Just trim the bumper and bend a metal clip and you are good to go.
Price:$700
AVO Wastegate Actuator 15PSI for TD04s
Price: $100
Black Perrin BOV VTA
Price:SOLD
Black Perrin Cold Air Intake
Price: $150
09+/STi Grill black painted brow and also PILLAR-LESS! (Yes I cut out the ugly pillar and there are no drawbacks just a cleaner look!)
Price:SOLD
Red Urethane RA Mudflaps
Price: PENDING
Black Urethane RA Mudflaps (not pictured)
Price: $100
BC BR Coilovers-$700
Price: SOLD
Harman Motive Up Pipe V-Band 44mm Red Tial (.9 Bar) EWG w/ dump tube
Price: SOLD
Last edited by Imprezard; 04-29-2011 at 07:07 PM. Reason: New Parts Added!
02-12-2011, 05:11 PM
#8
Registered User
iTrader: (10)
Join Date: Feb 2010
Location: San Jose CA
Posts: 560
Car Info: 2008 WRX
How dare you post your coilovers now I want them and will find a way to buy them and spend money i shouldn't be spending in the first place. hope jourdan beats me to it! hahah bump for you though
02-12-2011, 09:02 PM
#12
Registered User
Thread Starter
iTrader: (7)
Join Date: Mar 2009
Location: Bay Area, CA
Posts: 860
Car Info: 2010 997.2 GT3
As for the BCs right now SJ has set up a pick up date and a price. If someone wants to beat it let me know, because I could really use the money for my new project
02-12-2011, 10:28 PM
#15
Registered User
Thread Starter
iTrader: (7)
Join Date: Mar 2009
Location: Bay Area, CA
Posts: 860
Car Info: 2010 997.2 GT3
Projects as of right now...
1) Get an 3.6 H6 from a Tribeca (my friend's moms tribeca is totaled but the engine is fine, and it just sits in the driveway these days) and do a swap like what Perrin did
or
2) Buy new upgraded parts of what I am trying to sell. I sold my Stoptechs, I have Alcons on order and a 73mm KSTech CAI, I plan to get some KW V2s, Volk TE37SL 18x9, Invidia Catless DP, TurboXS CBE (maybe I will get a straight pipe fabbed up, but we'll see how long that lasts), possibly Perrin rotated GT35, Blouch dom 4xtr or ATP GT3582R bolt on and upgrade to 1000 or 1300cc injectors. And call it a day.
Really Tito it's go big or go home time. haha
Last edited by Imprezard; 02-12-2011 at 10:43 PM.