New guy from MO
Thread Starter
Registered User
Joined: Feb 2010
Posts: 7
From: St. Louis
Car Info: '02 WRX RWD swap done by me
New guy from MO
Hey everyone, I actually stumbled upon this site while on google looking up engine mounts and what not. I believe I had first contact because of a local guy.
Anyways My name is Nathan. I own WRB 03 WRX here are the goods on it. It is RWD converted and I do drift it.
Exterior/Interior as follows.
VIS CF Hood
CW Grill
CW Sideskirts
CW rear bumper
Rota Subzero 17" in black with silver rim
Stock wheel's painted
I custom Fabed the center console to have the Radio in the stock clock position and then my gauges are where the radio would normally be.
Oil pressure gauge, oil temp gauge and boost gauge.
Mirror tinted windows.
Wingless trunk
Misc. Stickers for things like STLSubaru, DriftSTL, Control Freaks and Driftmechaniks
Engine-
AP V1
Short air intake
CSS TMIC
12 LBS Flywheel
South Bend Kevlar/ceramic clutch TZ type
Drivetrain-
H&R Coilovers
Whiteline 27MM rear sway
Whiteline metal rear endlinks
Whiteline rear sway body mounts.
Custom Drive shaft made by Bruce over at A-line Driveshaft. (I.E. SubaruBruce.)
Custom Axles made by Constant Velocity of Ocala. http://www.cvaxles.com/
Welded Center Differential
Welded Rear Differential
Replaced rear transfer gears and bearings with OEM Shot peened and cryo treated gears.
A few pics. The car is lower now than it was in the pics.
Anyways My name is Nathan. I own WRB 03 WRX here are the goods on it. It is RWD converted and I do drift it.
Exterior/Interior as follows.
VIS CF Hood
CW Grill
CW Sideskirts
CW rear bumper
Rota Subzero 17" in black with silver rim
Stock wheel's painted
I custom Fabed the center console to have the Radio in the stock clock position and then my gauges are where the radio would normally be.
Oil pressure gauge, oil temp gauge and boost gauge.
Mirror tinted windows.
Wingless trunk
Misc. Stickers for things like STLSubaru, DriftSTL, Control Freaks and Driftmechaniks
Engine-
AP V1
Short air intake
CSS TMIC
12 LBS Flywheel
South Bend Kevlar/ceramic clutch TZ type
Drivetrain-
H&R Coilovers
Whiteline 27MM rear sway
Whiteline metal rear endlinks
Whiteline rear sway body mounts.
Custom Drive shaft made by Bruce over at A-line Driveshaft. (I.E. SubaruBruce.)
Custom Axles made by Constant Velocity of Ocala. http://www.cvaxles.com/
Welded Center Differential
Welded Rear Differential
Replaced rear transfer gears and bearings with OEM Shot peened and cryo treated gears.
A few pics. The car is lower now than it was in the pics.
*drools* There's no drooling smiley...but I <3 your car...makes me want a bugeye 
That's awesome that you drift it!
Welcome!! Enjoy your stay on the forums, everyone is pretty nice! 
That's awesome that you drift it! Welcome!! Enjoy your stay on the forums, everyone is pretty nice!
I have an FC that is in the middle of an engine swap due to some warped rotor-housings and blown apex seals. I love the rotaries too and the maintenance does suck. Lol
Thats why I have my subie, cause it's pretty much the best thing evar!
Registered User
iTrader: (6)
Joined: Mar 2006
Posts: 9,581
From: on the way to lake tahoe to shread! turbo beast
Car Info: 2016 WRX, 2014 lifter forester XT, 2005 JDM207 WGN
Thread Starter
Registered User
Joined: Feb 2010
Posts: 7
From: St. Louis
Car Info: '02 WRX RWD swap done by me
Electra, wow that is a bummer. What motor are you planning on putting in it? If you say something like a 3 rotor I will heart you.
Thank you for the welcome 04Cali, That's abit north of me by a few hours lol. I hope they are enjoying the snow as much as I am lol.
Thank you for the welcome 04Cali, That's abit north of me by a few hours lol. I hope they are enjoying the snow as much as I am lol.
Thread
Thread Starter
Forum
Replies
Last Post
subymobbin303
Teh Politics Forum
1
Nov 8, 2010 08:58 PM