WTT/B: My suspension for L or RS
#1
Registered User
Thread Starter
Join Date: Nov 2002
Location: Wichita, KS
Posts: 188
Car Info: 02 wrx wgn
WTT/B: My suspension for L or RS
Location: Wichita, KS
I am going to be buying an 02 WRX wagon (hopefully
)and will be putting my car close to stock to sell....I am looking to buy or trade + cash for my suspension. I won't need the top hats, because that is the only thing I didn't throw away, heh! So struts and springs from an L or RS. OR - If you want to buy my car as it stands now email me.
All parts listed I have had on for about 15k miles, 1 yr and almost 5 months.
Here is what I have:
-KYB AGX adjustable gas struts (4 way front/8 way rear) - qty 4
--The previous user only ran them on the softest setting w/ stock RS springs for about 20k miles, then bought Teins. I have had them on for about 15k miles, so they have about 35k miles total on them. I usually run them on 2/5. Have 4 screwdrivers for front struts and 2 AGX stickers.
>$250 all 4 AGX's
-SPT/Eibach Springs - qty 4
--Previos owner used them for about 30k miles, I have had on for about 15k, so they have about 45k total. I think they are a stiff match with the AGX's only drawback is they keep the car right around stock height, very slightly lower. I believe this is the spring rate, otherwise I can try and look at them while on the car - Front=217 Rear=190?
>$100
-Cusco Camber Plates Front - qty 2
--I also bought these used as well. Not sure mileage, I have had on for about 15k miles. Can adjust up to -3 degrees of camber. They are pillowball. Key included to adjust camber. They only have the nuts that fit the AGX's.
>$120
-Cusco Camber Plates Rear - qty 2
--I bought these from a member but they were never used. Only used for about 15k miles. Can adjust up to -3 degrees of camber for your rear setup! They are pillowball as well, and are a little noisey, but hey I survived. Key included to adjust camber (same as front). They come with the stock nuts and/or AGX's.
>$150 w/ stock nuts or $150+$20=$170 w/ stock and AGX nuts.
>>(AGX nuts alone were another $35 from Gruppe-s)
Buyer pays shipping! Will do a pkg deal if buyer wants it all. I have boxes for AGX's and camber plates. Struts and plates also have instructions.
Pics will be up soon!
-Joe
oneoffive@aol.com
ps- Email me and I can work with you, if you live near me I can meet!
I am going to be buying an 02 WRX wagon (hopefully
![Smilie](https://www.i-club.com/forums/images/smilies/smile.gif)
All parts listed I have had on for about 15k miles, 1 yr and almost 5 months.
Here is what I have:
-KYB AGX adjustable gas struts (4 way front/8 way rear) - qty 4
--The previous user only ran them on the softest setting w/ stock RS springs for about 20k miles, then bought Teins. I have had them on for about 15k miles, so they have about 35k miles total on them. I usually run them on 2/5. Have 4 screwdrivers for front struts and 2 AGX stickers.
>$250 all 4 AGX's
-SPT/Eibach Springs - qty 4
--Previos owner used them for about 30k miles, I have had on for about 15k, so they have about 45k total. I think they are a stiff match with the AGX's only drawback is they keep the car right around stock height, very slightly lower. I believe this is the spring rate, otherwise I can try and look at them while on the car - Front=217 Rear=190?
>$100
-Cusco Camber Plates Front - qty 2
--I also bought these used as well. Not sure mileage, I have had on for about 15k miles. Can adjust up to -3 degrees of camber. They are pillowball. Key included to adjust camber. They only have the nuts that fit the AGX's.
>$120
-Cusco Camber Plates Rear - qty 2
--I bought these from a member but they were never used. Only used for about 15k miles. Can adjust up to -3 degrees of camber for your rear setup! They are pillowball as well, and are a little noisey, but hey I survived. Key included to adjust camber (same as front). They come with the stock nuts and/or AGX's.
>$150 w/ stock nuts or $150+$20=$170 w/ stock and AGX nuts.
>>(AGX nuts alone were another $35 from Gruppe-s)
Buyer pays shipping! Will do a pkg deal if buyer wants it all. I have boxes for AGX's and camber plates. Struts and plates also have instructions.
Pics will be up soon!
-Joe
oneoffive@aol.com
ps- Email me and I can work with you, if you live near me I can meet!
Thread
Thread Starter
Forum
Replies
Last Post
steen80
NorCal Classifieds
5
02-06-2014 12:38 PM
Deserted1
Suspension, Handling, and Brakes
2
08-01-2008 08:19 PM
bluekn8286
Suspension, Handling, and Brakes
16
04-27-2007 06:16 AM
DaFastOne
Suspension, Handling, and Brakes
25
08-09-2005 01:53 AM