you can take out the back seat. i think scoobymods.com has all the hows 2

 

i think there are two bolts down below the seat a few inches above the floor. remove thoes two and then pull out the lower seat section. thats all i can remember. i think you then have acess to the bolts that hold the back part to the body. remove thoes and push the seat back up and its unhooks from the rear deck.

 

all it is is 2 bolts holding in the bottom and then 2 holding in the top, plus some hooks that are easily undone.

 

There should be a Sedan rear folding seat kit made. Can the wagon seats fit into the sedans?

 

Thread moved from EJ20 Engine forum.

--
0==WW==0
"…axles of evil…" - george w. bush

 

Removing the seats in the sedan is cake.

Below the rear seats (at the front) are two bolts. Take em out.
Now lift the bottom portion of the seat up, and pull it forward, removing it from the car.
Behind the seat cushion should be four bolts at the bottom of the upper seat half. remove those.
Now open up your armrest and pass through, then lift up on the upper seat half and remove.

voila