STi solid fog light covers??
)
12-24-2002, 05:35 PM
#6
Guest
Posts: n/a
ya, you would think "fog light covers" would not require you to remove the "fog lights". I tinkered and tinkered....I don't see a way around it. There is only one way for the backet to be installed...the fog light just seems a bit too big to get around it...
12-24-2002, 08:30 PM
#7
Guest
Posts: n/a
attach the bracket outside the car onto the cover and play around that way with it. You can just put it streight in you have to put it around the foglight.
Attach the bracket to the foglight cover and look how it supposed to be. It will only go in one way. What I had to do is get longer screws because I could not put then on with the short screws they supplied and now its a lot easier to put on. Hope that helps.
NeVz
Attach the bracket to the foglight cover and look how it supposed to be. It will only go in one way. What I had to do is get longer screws because I could not put then on with the short screws they supplied and now its a lot easier to put on. Hope that helps.
NeVz
12-26-2002, 06:04 PM
#8
Registered User
Join Date: Dec 2002
Location: Austin, Tx
Posts: 54
Car Info: 02 WRX SportWagon /MBP
you can either dremel the bottom prong of the foglights smooth so that you can align the fogs with bracket intact or you just clip them in without the brackets. They hold securly but can be stolen easily.
I just removed them cause IMO they look better on with JDM lights.
I just removed them cause IMO they look better on with JDM lights.
12-29-2002, 10:26 PM
#9
Guest
Posts: n/a
Originally posted by NeVzWRX
I think you are putting the bracket on wrong. I dont think you need to remove the foglights.
NeVz
I think you are putting the bracket on wrong. I dont think you need to remove the foglights.
NeVz
12-30-2002, 11:43 AM
#10
Registered User
Join Date: Nov 2002
Location: http://www.winning-smiles.com
Posts: 1,330
Car Info: 2016 Red WRX
yah mang. u gotta take the fogs out for the solid covers. Nevz, you have solid fogs with your fogs still in? if so, thats how u got them on? cause i got solids, and i dont see how u can get the fogs in without altering the bracket.
12-30-2002, 04:42 PM
#11
Guest
Posts: n/a
Originally posted by HongKongBeef
yah mang. u gotta take the fogs out for the solid covers. Nevz, you have solid fogs with your fogs still in? if so, thats how u got them on? cause i got solids, and i dont see how u can get the fogs in without altering the bracket.
yah mang. u gotta take the fogs out for the solid covers. Nevz, you have solid fogs with your fogs still in? if so, thats how u got them on? cause i got solids, and i dont see how u can get the fogs in without altering the bracket.
Thread
Thread Starter
Forum
Replies
Last Post
soundwave
NorCal Classifieds
8
06-10-2009 10:00 PM
