PROJECTOR Adjustments. . .
Thread Starter
Registered User
iTrader: (4)
Joined: Apr 2004
Posts: 87
From: San Jose ,CA
Car Info: 03' WRX STi Spec C,05' Forester XTi
PROJECTOR Adjustments. . .
NEED ASSISTANCE. . .
i just purchased a pair of used WRX "PROJECTORS." I've noticed that the beams are too low. Is There a way where i could raise the beams higher??! Im tired of driving at night i cant see crap!!! Thanks a Bunch! -Marc
i just purchased a pair of used WRX "PROJECTORS." I've noticed that the beams are too low. Is There a way where i could raise the beams higher??! Im tired of driving at night i cant see crap!!! Thanks a Bunch! -Marc
Registered User
iTrader: (7)
Joined: Nov 2002
Posts: 820
From: San Jose-near milpitas
Car Info: 03 Wrx black sedan + 2013 BRZ
on your projectors there should be two white *****. One is at the top of the projector and one is at the bottom. You can turn those ***** with a wrench to adjust the beam up and down and left and right.
Jason
Jason
Originally Posted by bEnW@
would anybody be able to tell me how to make a headlight adjustment switch for the JDM 02' HID projectors? i can see the motor in the headlight unit but have no idea how to create that in-car switch to adjust the height
i have the switch, and i think it's rather hard to "make" one. Try locating one that's for sale by either vendors or members.
Registered User
iTrader: (1)
Joined: Oct 2004
Posts: 64
From: San Jose (Cambrian), Ca
Car Info: V7 PSM SEDAN
Originally Posted by doughboy
use a ratcheting wrench if you're going to adjust it manually...it makes the job a VERY simple 2 minute endeavor.
Doughboy,
You seem knowledgeable on this. Can I get assitance when my JDM projectors arrive?
Thanks,
J
Thread
Thread Starter
Forum
Replies
Last Post
AWDrifter21
Suspension, Handling, and Brakes
3
Aug 1, 2004 07:54 PM
