I recieved my mesh fog covers from gruppe-s. They did not come with screws, only brackets. Does anyone have any ideas what screws to use or any pics of how these things go together....I'm at a loss.

 

Hey.

I just used the bolts that come with the RS covers: You should be able to get the bolt kit from the local suby dealer.

Regarding the mounts: There is a bolt on the outside at the bottom of the fog light you use this for mounting the bracket. You'll probably need to bend the bracket a bit to fit the hole in the mesh cover. I mounted the bracket first then bent it to fit.

There should be tabs on the sides of the mesh cover, those should pop into matching gaps in the fog lamp surrounds.

So to cover again as this e-mail seems confusing.

1) Buy bolts for RS foglight covers from Suby dealer
2) Mount bracket and bend to align with the cover
3) Pop the covers in on the tabs first, then screw the bolt into now bent bracket.

Hope this clarifies. If not let me know and I'l try to send some pics.

Thanks.

Tim

 

thank you on the bolt info, I can probably figure out the brackets given the bolts, thanx again