Okay so, Im going frantic here trying to install my spolier. The holes just dont line up and they should. If anybody has experience with this wing can you please help me out?

 

I can probably help you out, Take some pictures and show us what you are talkin about exactly. . .

 

Thanks for the help, but Im sending this thing back to where it came from. It has to be a defect. I found a DIY install with pictures and I could still not get it to fit. Now I have a scratched trunk with two washers floating around in it.

 

front bolts outside back bolts inside. try that. or front bolts inside and backs outside.

if you cant get it to fit properly go to the hardware store and buy a few spacers.

 

I have the mounts on the right way but even spacers wouldn't get it to fit its too far off.

 

fit the risers onto the wing and then put it on the car and see how that works. Mine took a little bit of play, but it worked.

 

Thats what I did. It was like an inch off on fitment. I couldnt even manage to work in in there without scratching up the trunk or bending the holes out.