Impreza Fog Light Question
I have a '95 Impreza 2.2l, and I was wondering how the heck I replace the bulbs in the fog lights? I think their H3 bulbs, but I really am not sure.
I've search all over for answers, but haven't found any clear answers yet.
I've search all over for answers, but haven't found any clear answers yet.
Last edited by jpwm; Feb 9, 2005 at 05:35 PM.
hey man,
i have the same problem. do you have the LX (coupe)? i was thinking about just removing them (partially cause mine are busted. one has a small hole, the other doesnt even look like a fog anymore.) and putting some PIAAs in there place. i tried to pull them off but there is a mounting bracket above them which holds them in. this makes it interesting cause i cant fit anything in there to undo the bolts.
one thin gyou might try is to reach back behind them and try to fiddle with it. i am pretty sure the bulbs twist out (turn 90 degrees oull) like the headlight ones. also i looked up the number in the PIAA book and they do take H3s.
good Luck
i have the same problem. do you have the LX (coupe)? i was thinking about just removing them (partially cause mine are busted. one has a small hole, the other doesnt even look like a fog anymore.) and putting some PIAAs in there place. i tried to pull them off but there is a mounting bracket above them which holds them in. this makes it interesting cause i cant fit anything in there to undo the bolts.
one thin gyou might try is to reach back behind them and try to fiddle with it. i am pretty sure the bulbs twist out (turn 90 degrees oull) like the headlight ones. also i looked up the number in the PIAA book and they do take H3s.
good Luck
Yeah, I have a LX(Coupe). The bulb housings are still in great condition(although one of my headlights does have a very small hole in it). Once the weather warms up a bit, I'll fiddle around with it to see if I can get it out. I thought they would be H3's just because that seems to be Subaru's bulb of choice for those fog lights on our cars.
Registered User
iTrader: (10)
Joined: Sep 2004
Posts: 1,180
From: An ALMS race near you
Car Info: 03 MBP WRX
H3 bulbs usually have a spring loaded lever holding the bulb in place and a single wire that plugs into the wiring harness. Unfortunetly you have to take the fog light assembly out to get to the bulb. I not familiar with that model year so I don't know how to remove the light, but I just wanted to give you a heads up about the bulbs.
Thread
Thread Starter
Forum
Replies
Last Post
luckyWRX777
Interior, Exterior & Lighting
4
Apr 18, 2011 12:47 PM
1FSTREX
NorCal Classifieds
4
Jun 26, 2009 06:07 PM
DaFastOne
NorCal Classifieds
4
Jun 22, 2005 06:51 PM
DaFastOne
Used Aftermarket Car Parts For Sale
0
Jun 16, 2005 05:51 PM



