How do you clear the orange in STI headlights?
VIP Member
Joined: Apr 2003
Posts: 1,348
From: Trying to figure out something creative to put her
Car Info: 2005 CGM WRX Wagon
VIP Member
iTrader: (3)
Joined: Dec 2003
Posts: 1,663
From: Corpus Christi, Texas
Car Info: 2002 Honda S2000
Well here if you haven't found directions yet here they are:
#1. Take your headlights off your car
#2. Take out all the screws around the headlight
#3. Put on Headlight in the oven for 10-15 minutes at 200 degrees
#4. Take the headlight out and pull the front and back apart.
#5. Pop out and unscrew all the orange stuff.
#6. Put the headlight back together nice and snug
#7. Put back in the oven for another 10-15 minutes
#8. Then make sure the headlight is sealed tight by pushing it together again.
#10. Put headlight back in car.
Repeat the steps for both headlights.....
p.s. Take out all bulbs and wires before putting it in the over.
Post if you have anymore questions or pm me
#1. Take your headlights off your car
#2. Take out all the screws around the headlight
#3. Put on Headlight in the oven for 10-15 minutes at 200 degrees
#4. Take the headlight out and pull the front and back apart.
#5. Pop out and unscrew all the orange stuff.
#6. Put the headlight back together nice and snug
#7. Put back in the oven for another 10-15 minutes
#8. Then make sure the headlight is sealed tight by pushing it together again.
#10. Put headlight back in car.
Repeat the steps for both headlights.....
p.s. Take out all bulbs and wires before putting it in the over.
Post if you have anymore questions or pm me
VIP Member
Joined: Apr 2003
Posts: 1,348
From: Trying to figure out something creative to put her
Car Info: 2005 CGM WRX Wagon
^^^That's exactly right.
Elevation303 - You should check out the Rocky Mountain forum and join us at our next meet! There's one going down this weekend.
Elevation303 - You should check out the Rocky Mountain forum and join us at our next meet! There's one going down this weekend.
For all 04' lights, there is one screw thats hidden underneath a piece of foam. In addition you will need to remove the white piece attatched by two screws in order to get to the housing screw underneath it.
VIP Member
iTrader: (3)
Joined: Dec 2003
Posts: 1,663
From: Corpus Christi, Texas
Car Info: 2002 Honda S2000
Originally Posted by Seraph
Hm, i'm pretty sure there was a writeup somewhere on the other board, cuz thats where i got my instructions from
There is on Scoobymods....it has pics and everything. That's where I got my info too.
Thread
Thread Starter
Forum
Replies
Last Post
wrxracing
Subaru OEM Parts For Sale
0
Aug 2, 2009 06:32 PM
planethub
For Sale by Members
3
Dec 10, 2002 06:52 PM




