Hello there
I'm installing fog lights on my 07 STI...
So I installed the fog lights and the switch since it's an upgrade I don't have the switch there, but the wires are already there, so what happens now is that the switch works and lights up, but the fog lights doesn't!! So I checked all the fuses nothing wrong with them and I checked the harness that goes into the fog lights it has ground but it doesn't have power, so I figured there's unblocked harness so I took the bumper out and followed the harness it's all good until it connects into the main harness!! I'm trying to get it done today since the bumper is out already.
If you have any ideas/thoughts will be helpful, thanks in advance

Sean

 

Did you purchase a legit fog light kit? When I had purchased some knockoff ones from ebay, the foglight switch was a dud. I had to ghetto rig it so that the fog lights stay on always. If that's the case, you'll need to purchase another fog switch.

 

I got the switch from the dealer, and I checked the fog lights on the side they work fine

 

Should I do a custom wiring to the switch??