Yesterday on the way home w/ my wife, I started the car and only my corner lights came on. I then tried several things to see if maybe it was driver error (it wasn't). I found that my highbeams seemed to work ok and that it was only my low beams. I bought my bulbs about 6 months ago. I'm going to buy new bulbs today, but I was wondering if anybody had had the same type of problem or what might cause this other than the bulbs just going out? Any help greatly appreciated

 

With a quick look at the wiring diagram, I'd say to check Check the DRL relay and M/B Fuses 8 and 9. More likely its the DRL relay since highbeams require 8 & 9 to be working.

jason

 

Oh.. and lemme know if that does the trick

jason

 

If you were using aftermarket bulbs check and make sure you didn't burn off the low beam connector in the 9007 (plug) harness. Higher wattage bulbs will do this .Splicing on a heavier gauge wiring harness is usualy the only answer not to mention the only option. Nokya makes an affordable HD harness as do most bulb manufacturers.

 

I replaced the bulbs ant that seems to have solved the problem for now. I will definately keep in mind about the harness if in another 6 month my low beams burn out again.

Thanks again for posting your responces