Cup Holder
Guest
Posts: n/a
Cup Holder
This is kind of minor but...
On the 02 wrx the cup holder extends from the dash. Mine worked fine untill recently, now the cup won't fit down in the holder as far as it used to and falls out from time to time. The problem seems to be that the little lower base of the holder doesn't go down as far as it used to. I'll take it in as soon as I get my stock wheels back on for the winter and see if the dealer will warranty it.
Anybody else have this problem?
Jim
On the 02 wrx the cup holder extends from the dash. Mine worked fine untill recently, now the cup won't fit down in the holder as far as it used to and falls out from time to time. The problem seems to be that the little lower base of the holder doesn't go down as far as it used to. I'll take it in as soon as I get my stock wheels back on for the winter and see if the dealer will warranty it.
Anybody else have this problem?
Jim
Registered User
iTrader: (7)
Joined: Dec 2002
Posts: 10,029
From: Sacramento CA
Car Info: 02 Impreza WRX sedan
Make certain that the cupholder tray is pulled all the way out. If it's even the slightest bit retracted, the bottom portion won't extend downward to its lowest position, thereby letting cups fall out. My cupholder is 'sticky' but works if I pull it straight out.
If this isn't the case with yours, the dealer can fix you up under warranty.
--
0==WW==0
"…axles of evil…" - george w. bush
If this isn't the case with yours, the dealer can fix you up under warranty.
--
0==WW==0
"…axles of evil…" - george w. bush
Registered User
Joined: Jan 2003
Posts: 80
From: Pennsylvania
Car Info: 2007 Subaru Legacy SE
Originally posted by Wingless Wonder
Make certain that the cupholder tray is pulled all the way out. If it's even the slightest bit retracted, the bottom portion won't extend downward to its lowest position, thereby letting cups fall out. My cupholder is 'sticky' but works if I pull it straight out.
[/color]
Make certain that the cupholder tray is pulled all the way out. If it's even the slightest bit retracted, the bottom portion won't extend downward to its lowest position, thereby letting cups fall out. My cupholder is 'sticky' but works if I pull it straight out.
[/color]
Registered User
iTrader: (7)
Joined: Dec 2002
Posts: 10,029
From: Sacramento CA
Car Info: 02 Impreza WRX sedan
There are a lot of plastic-on-plastic rubbing surfaces on that cupholder. I may try a light dose of silicone lube to see if it slides out easier (never have a problem pushing it back in).
--
0==WW==0
"…axles of evil…" - george w. bush
--
0==WW==0
"…axles of evil…" - george w. bush
Thread
Thread Starter
Forum
Replies
Last Post
t3ch9
NorCal Classifieds
1
Sep 7, 2004 11:20 AM
