'04' WRX Wagon body kit questions
Guest
Posts: n/a
'04' WRX body kit questions
Hello, I'm thinking about purchasing a '04' WRX wagon sometime in the near future and I have a couple of questions regarding possible body kits available for the '04' WRX wagon. Are there many body kits out there already available for this car? And is it possible to use previous years (bug eye look) WRX wagon body kits to the new '04' wagons?
Last question, is it possible to take the '04' WRX sedan front fenders and put them on the '04' WRX wagon? I like the "flanged" look of the sedans fenders versus the boring non-flanged ones that the WRX wagons that they come with. I don't know why Subaru purposely made the WRX wagons with less of an aggressive look than the WRX sedan models.
thanks in advance!
e
Last question, is it possible to take the '04' WRX sedan front fenders and put them on the '04' WRX wagon? I like the "flanged" look of the sedans fenders versus the boring non-flanged ones that the WRX wagons that they come with. I don't know why Subaru purposely made the WRX wagons with less of an aggressive look than the WRX sedan models.
thanks in advance!
e
Last edited by Powersurge; Jan 16, 2004 at 04:56 PM.
Registered User
Joined: Jan 2004
Posts: 2
From: Socal, Orange county
Car Info: 2004 WRX Wagon Silver
Huh,.. Im tring to find out the same thing with the wide front fenders for the wagon. This is what i know so far.
1. The front end of the 04 Wagon is the same as the RS in other words narrower by about 2" total 1" on ether side, I had put my old Cusco front anti sway bar on and it fit but the bar ends had to be pushed out a little bit for the bar to fit but it does no problem.
Also the Cusco front Lower arm brace type II fits as well.
2. You can change the front end with replacing the "A" arm maybe the steering control arm and the drive shafts which will be the most expensive of this mod. ( this is what im planning to do with mine.)
3. Now i pretty sure the fenders will fit cause i know of people that have taken the 03 sedan fenders and put them on the 03 wagons and also some 02's as well. But for the 04's you'll need to also replace the front bumper too. Also the wheel well covers(which all the other wagon mods had to do.)
If you find out more let me know.
L8RZ
1. The front end of the 04 Wagon is the same as the RS in other words narrower by about 2" total 1" on ether side, I had put my old Cusco front anti sway bar on and it fit but the bar ends had to be pushed out a little bit for the bar to fit but it does no problem.
Also the Cusco front Lower arm brace type II fits as well.
2. You can change the front end with replacing the "A" arm maybe the steering control arm and the drive shafts which will be the most expensive of this mod. ( this is what im planning to do with mine.)
3. Now i pretty sure the fenders will fit cause i know of people that have taken the 03 sedan fenders and put them on the 03 wagons and also some 02's as well. But for the 04's you'll need to also replace the front bumper too. Also the wheel well covers(which all the other wagon mods had to do.)
If you find out more let me know.
L8RZ
Registered User
Joined: Jan 2004
Posts: 2
From: Socal, Orange county
Car Info: 2004 WRX Wagon Silver
Well I hope you read this,
Yes the front 04 sedan fenders fit straight up to the 04 wagon.
You will need to change the bumper too and put in new wheel well mud guards as well.
also i have a correction on the front end dimenstions there only 1/2 on each side narrower.
Yes the front 04 sedan fenders fit straight up to the 04 wagon.
You will need to change the bumper too and put in new wheel well mud guards as well.
also i have a correction on the front end dimenstions there only 1/2 on each side narrower.
Thread
Thread Starter
Forum
Replies
Last Post
Riezyu
Interior, Exterior & Lighting
8
Feb 19, 2003 07:40 PM
