I recently put in new hid's and they were working Fine until one day the passenger side stopped working. So I got a new ballast and bulb and they still didn't work. Is there something wrong with my car that require service or am I missing something. Fuses are ok and even had the store that sold me the hid kit check their product. My car is a 2012 wrx and suggetions would greatly be appreciated

 

Check for bad/melted wiring to the headlight?

 

All wires are fine. What's weird is that it can power oem bulbs but not the hid

 

Have you tried the new bult/balast on the drivers side?

 

Yeah I've switched ballast and the passenger side works with the drivers side ballast and now I'm back to show the store who sold them to me the problem hopefully it gets fixed

 

If your car is on the h11 setup which it should be the issue is most likely due to the fact that the female and male plugs don't sit up well with each other which will cause a loose connection... you're gonna have to bend the metal prongs a bit to get them to really stick in there and then zip tie them securely... I had the same issue with mine

 

So problem.has been corrected for now. He the store owner gave me new bulbs for both and so far so good. The ks for the feedback everyone