AlanNgo7

Hey i-club i got my red vinyls overlay for my tail lights, but the problem is... I CANT REMOVE MY TAIL LIGHTS! There are two visible bolts that screw into the lights that I can remove and a plastic plate to remove the wiring to the lights. How do I remove my lights?!! It looks as if there is some strong 3m tape holding in the lights or non visible screws?


Here are some pictures that you can see for yourself


The two bolts on the left and the plastic square cover to unhook wiring


Side view of two bolts and tail light


took off plastic cover


bolts and open view


HOPEFULLY SOMEONE CAN HELP ME OUT! THANKS

zergling

iTrader: (3)

Try this thread. It's not specific to the tail lights, but he did remove them

http://www.3gwrx.com/forum/index.php?topic=4158.0

AlanNgo7

Thanks bro! That's a lot of work but, ill try! (:

stupidchicken03

iTrader: (38)

damn seems like a lot of work to just change out the emblem piece in that write up

Did make it look nice tho

AlanNgo7

I don't think its necessary to take off all of the panels, i'll only take off the bottom one. I'll post pictures of my results