WRX 2.0L Longblock- $500
Thread Starter
Staff Member
iTrader: (16)
Joined: Nov 2002
Posts: 3,644
From: She's so hot, I'd tongue-punch her in the fartbox
Car Info: 2001 RSTi Widebody
WRX 2.0L Longblock- $500
As the title states, it is a full WRX 2.0L motor, with turbo, engine wiring harness, etc. The heads are recently re-done and only have about 100 miles on them...the only bad thing is there is a spun rod bearing. This means the motor has to be disassembled and reassembled and the part replaced. Not sure how much a shop would charge, but the block and heads are are in spec and have been taken to a machine shop, so there is no need to re-do any of the work. I was going to use this for a project, but I dont have the time. PM me if interested.
Thread Starter
Staff Member
iTrader: (16)
Joined: Nov 2002
Posts: 3,644
From: She's so hot, I'd tongue-punch her in the fartbox
Car Info: 2001 RSTi Widebody
Updated price. Ryan (from R&D) told me that it would cost about $1000 or so for machinework to the crank, disassembly and reassembly...that's $1750 for a totally rebuilt motor, turbo and all you need
Thread Starter
Staff Member
iTrader: (16)
Joined: Nov 2002
Posts: 3,644
From: She's so hot, I'd tongue-punch her in the fartbox
Car Info: 2001 RSTi Widebody
If this is to be used as a swap for a GC, you can find a WRX body harness and ECU almost anywhere...and probably at a reasonable price
Thread Starter
Staff Member
iTrader: (16)
Joined: Nov 2002
Posts: 3,644
From: She's so hot, I'd tongue-punch her in the fartbox
Car Info: 2001 RSTi Widebody