Testing Waters: Items possibly for sale...
Thread Starter
Registered User
iTrader: (66)
Joined: Sep 2003
Posts: 3,615
From: Windward, Oahu
Car Info: 3 Sleepers: 05 LGT, 05 FXT, 02 WRX
Testing Waters: Some Items Priced...others pending
May be selling a few items to make room for upgrades:
PM me if interested...(I will put you in line and reply to you in the order that I receive the PM's)
1. 04 PSM Foglights (2 covers/2 fog lights/switch/Relay)
"Pending Sale" Walter
2. GPMoto Intake Elbow
"Pending Sale" Tazer
3. 04 PSM Rear Bumper with two scratches $100
"Pending Sale" Yummymojo (Garrick)
4. 8" JL MicroSub (Have two of these with the U-Brackets) $50 ea...this is cheap.
5. Carbon Fiber Intake Ramp (fits in front of radiator where the stock scoop is...)
"Pending Sale" Tazer
Brent
330-7718
BTW...the pics below were taken both at the same time...tonight. As you can see, the first pics looks like it is bad...I tried to take it from the angle where the light amplified the scratch as much as possible...now, a normal pic and the scratch doesn't even seem to be there...
The scratch is not deep at all...anyhow, you can be the judge...serious buyers only because I'd hate to haul it out of storage for nothing...remember, a new bumper/paintjob costs around $700-$800 bills...$100 is small change for a bumper in very nice shape.
PM me if interested...(I will put you in line and reply to you in the order that I receive the PM's)
1. 04 PSM Foglights (2 covers/2 fog lights/switch/Relay)
"Pending Sale" Walter
2. GPMoto Intake Elbow
"Pending Sale" Tazer
3. 04 PSM Rear Bumper with two scratches $100
"Pending Sale" Yummymojo (Garrick)
4. 8" JL MicroSub (Have two of these with the U-Brackets) $50 ea...this is cheap.
5. Carbon Fiber Intake Ramp (fits in front of radiator where the stock scoop is...)
"Pending Sale" Tazer
Brent
330-7718
BTW...the pics below were taken both at the same time...tonight. As you can see, the first pics looks like it is bad...I tried to take it from the angle where the light amplified the scratch as much as possible...now, a normal pic and the scratch doesn't even seem to be there...
The scratch is not deep at all...anyhow, you can be the judge...serious buyers only because I'd hate to haul it out of storage for nothing...remember, a new bumper/paintjob costs around $700-$800 bills...$100 is small change for a bumper in very nice shape.
Last edited by Island Style; May 16, 2006 at 04:02 PM.
Registered User
iTrader: (8)
Joined: Dec 2005
Posts: 512
From: Between Kapolei and Sand Island mostly
Car Info: Genesis Coupe - Karussell White 2.0T Track Model
dibs on the GPMoto elbow & Carbon Fiber Intake Ramp (pix?) if you decide to sell.
Curious about the "STI Momo 6sp Shift ****".. stock piece on an STI? or is it something else... pix?
PM me when you decide if you're selling or not.
Thanks
-tazer
Curious about the "STI Momo 6sp Shift ****".. stock piece on an STI? or is it something else... pix?
PM me when you decide if you're selling or not.
Thanks
-tazer
Thread Starter
Registered User
iTrader: (66)
Joined: Sep 2003
Posts: 3,615
From: Windward, Oahu
Car Info: 3 Sleepers: 05 LGT, 05 FXT, 02 WRX
Ok...here is the situation...
I may be picking up an FMIC...with that said, if some of the items mentioned above don't fit into the scheme of things due to the piping...I will be selling them...
Here are some pics I just took...
BTW...the JL Microsubs have a rounded back...the side profile looks like a "D" shape...it's not square or rectangular...
Here are some pics I just took...
BTW...the JL Microsubs have a rounded back...the side profile looks like a "D" shape...it's not square or rectangular...
Last edited by Island Style; May 11, 2006 at 11:16 PM.
VIP Member
iTrader: (39)
Joined: Jun 2005
Posts: 4,939
From: Seibukan Dojo /HI. Kendo Federation
Car Info: Seishin-teki kyōkō/Intonjutsu/Shinobi-ir
Foglights
I would be greatly interested in picking up the foglights if your fmic setup is being obstructed by the foglights!! Let me know
Thanks Brent,
Walter
Thanks Brent,
Walter
Thread Starter
Registered User
iTrader: (66)
Joined: Sep 2003
Posts: 3,615
From: Windward, Oahu
Car Info: 3 Sleepers: 05 LGT, 05 FXT, 02 WRX
Orville,
Originally Posted by BLuStI04
hey brent how much r u seelin the 8 inch sub??
Thread Starter
Registered User
iTrader: (66)
Joined: Sep 2003
Posts: 3,615
From: Windward, Oahu
Car Info: 3 Sleepers: 05 LGT, 05 FXT, 02 WRX
Pm'd you...regarding the ramp and elbow...
Shiftknob is stock 04 STi momo as can be seen in the pic. My cousin has an aftermarket shift **** he may let go that he took off his STi...I'll see if he wants to sell it.
Originally Posted by tazer
dibs on the GPMoto elbow & Carbon Fiber Intake Ramp (pix?) if you decide to sell.
Curious about the "STI Momo 6sp Shift ****".. stock piece on an STI? or is it something else... pix?
PM me when you decide if you're selling or not.
Thanks
-tazer
Curious about the "STI Momo 6sp Shift ****".. stock piece on an STI? or is it something else... pix?
PM me when you decide if you're selling or not.
Thanks
-tazer
Thread Starter
Registered User
iTrader: (66)
Joined: Sep 2003
Posts: 3,615
From: Windward, Oahu
Car Info: 3 Sleepers: 05 LGT, 05 FXT, 02 WRX
yes,
The engine damper works very well...my engine doesn't move around nearly as much as it used to...I'm sure my exhaust components are liking this mod...I don't have as many squeaks as I use to prior to installing it...
Thread Starter
Registered User
iTrader: (66)
Joined: Sep 2003
Posts: 3,615
From: Windward, Oahu
Car Info: 3 Sleepers: 05 LGT, 05 FXT, 02 WRX
PM me an offer...
Originally Posted by wrx57
how much for the 04 PSM Foglights (2 covers/2 fog lights/switch/Relay) ?
Brent