Looks like to put on heavy duty rear swaybars on the Forester, I'm going to have to beef up the lateral links...

If anyone has a set laying around they want to sell, please pm me.

Thank you,

Brent

 

you dont NEED it

 

I saw those...they are pricey little buggers...

 

home depot. 10$, 30 minutes

 

alright...I'll go and check it out Mark...thanks!

 

my rear sway bars fit perfectly fine without changing my lateral links, didnt even have to do ^that

 

^^^If you upgrade to 19mm or bigger rear sway bars...it is recommended to not only install heavy duty sway bar mounts...but to either install beefed up lateral links with thicker, stronger endlink attachment point tabs or if you use your oem Forester lateral links, to use the llws bracket as shown in his picture. If you buy them pre-made, like Whitelines, they charge ~ $50 for them...Mark is saying to source out the parts and fabricate them...which is what I plan to do...

Thanks again Mark.

 

the reason you want to is because the stock mount for the endlink has a tendency to snap off.

 

^^^ right. ESP if your looking to run a bigger sway bar later on Brent. U can prob just do the LLWS mod for now, but eventually might be worth looking at some LL.

 

^^ this guys XT has some, you had any probs with your rsb yet?

 

^^ no sir, and thank you. also running a larger sway bar/mounts and taking corners like a bat out of hell. some people here know how i can drive. bwahahaha.

sorry for the hijack

Bump for Brent and the search for Lateral links, or LLWS for now