Leftover 02 WRX parts sale
Thread Starter
Registered User
iTrader: (1)
Joined: Feb 2011
Posts: 99
From: Kaneohe Bay, HI
Car Info: 2002 WRX
Leftover 02 WRX parts sale
Ok, I have some left over parts from my build for sale. Prices are negotiable but be reasonable. I dont want them sitting around but I dont need to give them away either. If you are interested then call/text Mark at 513.253.6864
Bride (canadian) Cuga racing seats: Black fabric, in great condition, almost look unused. Were used by previous owner for less than a year, and I never installed them myself. Got a bit of dust on them from sitting in my room for a while but nothing that couldnt be cleaned off in about 10 mins. These will come with sliders and brackets that will fit 93-98 Legacy, and 93-07 WRX/STI. Not authentic Bride but very nice seats nonetheless. $600 OBO
SEAT PIC
stock exhaust manifolds and crosspipe: everything is complete, this would be good for a grimspeed PnP job. 100 obo
Pic 4
stock radiator: stock STI radiator. Works fine, was removed in favor of a Koyo aluminum radiator. Good for when your plastic end tanks start to leak. $50 obo
stock WRX brakes: almost full setup, only missing the rear rotors. Front rotors are about 50-60% life but everything else is in pretty good shape. $200 obo
DBA 4000 series STI rear rotors: I was going to do the ebrake swap but decided to go with the conversion rotors instead. They have about 10k miles on them and are in good condition. $150 obo
Stock TMIC: In good condition, not a lot of bent fins. 20 obo
stock turbo: came off the car at around 88k but seems to be in good shape, Leaf Racing told me it had almost no shaft play. $Sold
02-07 WRX/STI JSC Speed turbo inlet: its red, its in decent shape and I am informed it should fit 02-07 despite what leaf racing told me. The quality seems to be about even with the Perrin one I have so I would say its a good deal. $Sold
440cc Stock WRX injectors: they worked fine when pulled, replaced in favor of an 800cc set. $Sold
Replica Prodrive Lip: Made by BaysonR, it fits well but I decided I couldnt afford to lost the ground clearance. It is painted PSM but it is scraped up on the bottom since it was painted on the inside so the tape was ripped off and it dragged on the ground for a bit. It probably wouldnt be very noticeable if it were installed but it looks somewhat nasty. Pics in a post below. $Sold
Bride (canadian) Cuga racing seats: Black fabric, in great condition, almost look unused. Were used by previous owner for less than a year, and I never installed them myself. Got a bit of dust on them from sitting in my room for a while but nothing that couldnt be cleaned off in about 10 mins. These will come with sliders and brackets that will fit 93-98 Legacy, and 93-07 WRX/STI. Not authentic Bride but very nice seats nonetheless. $600 OBO
SEAT PIC
stock exhaust manifolds and crosspipe: everything is complete, this would be good for a grimspeed PnP job. 100 obo
Pic 4
stock radiator: stock STI radiator. Works fine, was removed in favor of a Koyo aluminum radiator. Good for when your plastic end tanks start to leak. $50 obo
stock WRX brakes: almost full setup, only missing the rear rotors. Front rotors are about 50-60% life but everything else is in pretty good shape. $200 obo
DBA 4000 series STI rear rotors: I was going to do the ebrake swap but decided to go with the conversion rotors instead. They have about 10k miles on them and are in good condition. $150 obo
Stock TMIC: In good condition, not a lot of bent fins. 20 obo
stock turbo: came off the car at around 88k but seems to be in good shape, Leaf Racing told me it had almost no shaft play. $Sold
02-07 WRX/STI JSC Speed turbo inlet: its red, its in decent shape and I am informed it should fit 02-07 despite what leaf racing told me. The quality seems to be about even with the Perrin one I have so I would say its a good deal. $Sold
440cc Stock WRX injectors: they worked fine when pulled, replaced in favor of an 800cc set. $Sold
Replica Prodrive Lip: Made by BaysonR, it fits well but I decided I couldnt afford to lost the ground clearance. It is painted PSM but it is scraped up on the bottom since it was painted on the inside so the tape was ripped off and it dragged on the ground for a bit. It probably wouldnt be very noticeable if it were installed but it looks somewhat nasty. Pics in a post below. $Sold
Last edited by usmcrockstar; Feb 28, 2012 at 12:58 PM.
Hate to break it to you, but a turbo inlet is a turbo inlet is a turbo inlet. They are all the same. There is no year-specific turbo inlets because the motors are 99.9% the same throughout the years. If it didn't fit, it was user error.
Meaning, the inlet will fit 02-07 WRX/STi, just like they all do.
Meaning, the inlet will fit 02-07 WRX/STi, just like they all do.
Thread Starter
Registered User
iTrader: (1)
Joined: Feb 2011
Posts: 99
From: Kaneohe Bay, HI
Car Info: 2002 WRX
according to Leaf Racing the fittings were in the wrong place. If it was user error then whatever, doesnt make much of a difference to me.
and no, I do not have a buyer yet... if you want it just text me and we can meet up whenever.
and no, I do not have a buyer yet... if you want it just text me and we can meet up whenever.
Thread Starter
Registered User
iTrader: (1)
Joined: Feb 2011
Posts: 99
From: Kaneohe Bay, HI
Car Info: 2002 WRX
bump, I need some of this stuff gone. I will be leaving for the mainland tuesday night but I will be back again on Jan 10. I would like to get something out of here before that though...
Thread Starter
Registered User
iTrader: (1)
Joined: Feb 2011
Posts: 99
From: Kaneohe Bay, HI
Car Info: 2002 WRX
PICS of the lip
Front:
P1210140 | Flickr - Photo Sharing!
Sides
P1210141 | Flickr - Photo Sharing!
P1210142 | Flickr - Photo Sharing!
Heres the damaged underside. Its not all that bad and you cant really even see it if its installed.
P1210143 | Flickr - Photo Sharing!
Front:
P1210140 | Flickr - Photo Sharing!
Sides
P1210141 | Flickr - Photo Sharing!
P1210142 | Flickr - Photo Sharing!
Heres the damaged underside. Its not all that bad and you cant really even see it if its installed.
P1210143 | Flickr - Photo Sharing!
Thread Starter
Registered User
iTrader: (1)
Joined: Feb 2011
Posts: 99
From: Kaneohe Bay, HI
Car Info: 2002 WRX
lol, yeah, and it cost me more than I'm asking just to get it painted. I would just put it back on but I'm just too lazy and I need money for my tax bills
Thread Starter
Registered User
iTrader: (1)
Joined: Feb 2011
Posts: 99
From: Kaneohe Bay, HI
Car Info: 2002 WRX
OK, so after a straight month in the field I am back and still want to sell this stuff...
Turbo, Injectors and inlet are gone. Everything else is still for sale. Im picking up my new DD today so I want all of this gone, just make some offers.
Turbo, Injectors and inlet are gone. Everything else is still for sale. Im picking up my new DD today so I want all of this gone, just make some offers.


