AVCR help
#1
Registered User
Thread Starter
Join Date: Oct 2003
Location: Kailua
Posts: 50
Car Info: 02 siver wrx wagon
AVCR help
Hello, I was wondering what the best setting to have on my AVCR is to save on gas. I have a 02 wrx wagon with helix flex up-pipe, down pipe, and stock exhaust from there. I also have a blitz air filter. I was wondering what to set it at to save the most gas. I have it at 0.8 bar right now and the duty is at like 50. Dont know if I could improve it much more, but was just wondering what you guys thought. Thanks for the input.
#3
Registered User
iTrader: (20)
Join Date: Mar 2004
Location: Hawaii
Posts: 1,635
Car Info: 08 Nissan Titan, 12 MazdaSpeed 3, 15 Honda CRV
Just chiming in my thoughts,..
But wouldn't you want to log and use a A/F meter to tune for the mods you have?
Im sure there are some people here that can help if you go open source...
Wish I knew how, but it's a learning curve I havent tackled yet.
But wouldn't you want to log and use a A/F meter to tune for the mods you have?
Im sure there are some people here that can help if you go open source...
Wish I knew how, but it's a learning curve I havent tackled yet.
#5
VIP Member
iTrader: (8)
Join Date: Feb 2003
Location: Santa Rosa, CA
Posts: 4,755
Car Info: 02 Subaru WRX w/ JDM Spec C
It is simple go get a tune, or pull the unit out. Every car is different, every mod is different to every car. Or buy a Cobb AP
You are trying to get away with a lot, but doing very little, and you are not going to like what happens later on down the road.
You are trying to get away with a lot, but doing very little, and you are not going to like what happens later on down the road.
Last edited by nic3krnnamja83; 06-26-2010 at 07:55 PM.
Thread
Thread Starter
Forum
Replies
Last Post