Just installed a Blizt TT tonight. Everything is working fine, except I can't arm the factory alarm until the timer has shut the car off. I cut & spliced the wires using directions from Scooby Mods

Any suggestions as to why this is?

 

I did a little more research, & found that the scoobymods.com directions I used didn't work for me. Whether they worked for others, I'm not sure. Maybe there's a difference in the years, or possibly the alarm systems.....

Anyways, if your alarm won't arm while the turbo timer counts down, follow these Instructions

Effectively, the only difference is to cut the same wires described in the scoobymods directions, only this time, don't replace the signal with one from the accessory wire on the ignition harness.