noob question 0n intake silencer
VIP Member
iTrader: (7)
Joined: May 2003
Posts: 4,990
From: on da compz...readin' yo blogz
Car Info: "the loud one"
Originally Posted by lostUNCERTAIN
how do i take off my emblems? =)
haha im just kidding.. you can flame me now
haha im just kidding.. you can flame me now
...hahahhahhaa...jus playin
VIP Member
iTrader: (23)
Joined: Feb 2004
Posts: 4,128
From: Driving the Green Beast
Car Info: Version 7.5 2002 STi
To remove the silencer:
1) Drain all muffler fluid from the stage 2 reservoir.
2) Remove spark plug by-pass gasket
3) Locate 2 12mm bolts holding the passenger headlight intake and remove
4) You should be able to see the intake silencer
5) Cut the ignition wire located below the silencer so you can pull it out.
6) Pull the silencer out, if it doesn't just slide out you did something wrong.
7) Reverse procedure, but please do not add more than 28 quarts of muffler fluid.
hehe just playin'
YES I'm not working... muhaha
1) Drain all muffler fluid from the stage 2 reservoir.
2) Remove spark plug by-pass gasket
3) Locate 2 12mm bolts holding the passenger headlight intake and remove
4) You should be able to see the intake silencer
5) Cut the ignition wire located below the silencer so you can pull it out.
6) Pull the silencer out, if it doesn't just slide out you did something wrong.
7) Reverse procedure, but please do not add more than 28 quarts of muffler fluid.
hehe just playin'
YES I'm not working... muhaha
Thread
Thread Starter
Forum
Replies
Last Post
2.5RN
Newbie & FAQ
6
Aug 21, 2014 02:23 PM
doubleU RX
Bay Area
16
Apr 29, 2007 07:49 AM
Toiletbrush
Engine/Power - EJ20T (pre-2006 WRX and JDM)
0
Jan 4, 2005 01:19 AM
ADIDAS
Engine/Power - EJ20T (pre-2006 WRX and JDM)
9
Sep 10, 2004 12:30 AM



